We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ivory steel flat elbow raceway fitting, two channels, 1.90 in wide by 0.87 in high

Legrand

Legrand V2411DFO Flat Elbow Raceway 2400D Series 2 Channel 1.90 in W 0.87 in H

SKU CH-FB9A-BGPV1

Flat elbow fitting for two-channel steel raceway, 1.90 in wide by 0.87 in high, screw-on mounting

  • 2-channel capacity handles multiple cable runs
  • 90 in width fits 2400D series raceway
  • .87 in height matches low-profile installations
  • Steel construction protects cables through flat bends
  • Ivory finish blends with standard trunking aesthetics

Flat Elbow Raceway 2400D Series 2 Channel

This Legrand flat elbow fitting connects two-channel raceway sections at a 90-degree turn. It is designed for installers routing power and data cables in commercial or residential surface-mounted systems. The ivory steel component matches the 2400D series profile and mounts with screws. It supports a 2-inch bend radius for smooth cable transitions.

Replaces damaged or missing 2400D flat elbows

The fitting upgrades an existing run when a corner section is cracked, corroded or no longer aligns after a remodel. Swapping the elbow restores the full cross-section so both channels keep their cable fill capacity. The jump is worth it when the raceway path changes direction and the original piece cannot be reused.

Maintains cable separation under continuous load

Steel construction resists deformation when cables press against the inner radius during long pulls or thermal cycling. The two-channel layout keeps power and low-voltage conductors apart along the entire bend. Screw-on mounting prevents the elbow from shifting when the raceway expands or vibrates.

Highlights

  • 2-channel capacity handles multiple cable runs
  • 90 in width fits 2400D series raceway
  • .87 in height matches low-profile installations
  • Steel construction protects cables through flat bends
  • Ivory finish blends with standard trunking aesthetics

Specifications

BrandLEGRAND

Questions about this item

What width and height raceway does the 1.90 in W by 0.87 in H flat elbow fit?

It is made for 2400D Series raceway measuring 1 7/8 in wide by 7/8 in high.

How is the screw-on flat elbow mounted, and what step is often missed?

Fasten the supplied screws through the pre-drilled holes into the raceway base; the step often missed is aligning the 2 in bend radius before tightening.

When should the ivory steel flat elbow be inspected or replaced?

Check for corrosion, impact damage or loose screws after any cable pull or building vibration; replace if the finish is breached or the channel is deformed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.