We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ivory steel cover plate raceway, 60 in long, 1 15/16 in wide, 1/4 in high

Legrand

Legrand V2400C Cover Plate Raceway 2400 Series 1 2 Channel 1 15/16 in W 1/4 in H Ivory Steel 60 in

SKU CH-Y2W1-6K0PD

Ivory steel cover plate for 2400-series raceways, 1 15/16 in wide by 1/4 in high, 60 in long, fits one- or two-channel runs

  • Protects wiring with durable steel construction
  • Fits 2400 series raceways 1 7/8 in wide
  • Covers one or two channels in single piece
  • 60 in length reduces joint count
  • Ivory finish blends with commercial interiors

Cover Plate for 2400 Series Raceway

This cover plate fits Legrand 2400 Series raceways measuring 1-7/8 inches wide by 7/8 inches high. It provides a protective enclosure for one or two channel configurations. The steel construction offers durability for commercial and residential wiring projects. Supplied in a 60-inch length for continuous runs.

Steel Material and Ivory Finish

The unfinished steel body resists mechanical damage while the ivory colour blends with standard interior palettes. No additional coatings or treatments are applied beyond the base finish. The cover snaps onto compatible raceway bases without tools or fasteners. RoHS compliance confirms restricted substance limits are met.

60-Inch Length and Dimensional Constraints

Each piece spans 60 inches, covering long straight sections with minimal joints. The 1/4-inch profile adds minimal height above the raceway base. Width matches the 1-15/16-inch raceway opening for a flush fit. Not suitable for raceway series other than 2400 or for outdoor installations.

Highlights

  • Protects wiring with durable steel construction
  • Fits 2400 series raceways 1 7/8 in wide
  • Covers one or two channels in single piece
  • 60 in length reduces joint count
  • Ivory finish blends with commercial interiors

Specifications

BrandLEGRAND

Questions about this item

Will the steel cover plate need repainting or corrosion protection after installation?

The unfinished steel surface has no factory coating; applying a compatible primer and paint after mounting will protect it from moisture and oxidation.

At what point does the 60 in length require an additional coupling or support during a continuous run?

Standard practice supports raceway covers every 5 ft; the 60 in section matches that interval, so a coupling or hanger is needed at each joint.

How much heat does the ivory finish dissipate when the raceway carries full cable loads all day?

The 1/4 in high steel cover acts as a passive shield; it does not generate heat and adds no measurable thermal resistance to the cables inside.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.