We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass reducing tee, 2 by 2 by three quarter inch PEX, no lead finish

Legend Valve

Legend Valve 462-233NL 2"x2"x3/4" NL PEX Tee F1960 plumbing

SKU CH-4D6Z-J6WTG

A no-lead forged brass reducing tee connects 2-inch and 3/4-inch PEX lines using F1960 cold-expansion fittings

  • No-lead forged brass reduces exposure risk
  • 2-inch cold-expansion PEX ends fit larger supply lines
  • 3/4-inch branch outlet serves smaller fixtures
  • ASTM F1960 expansion method creates secure joints
  • California Prop 65 warning discloses regulated chemicals

Legend Valve 462-233NL PEX Tee

This no-lead forged brass reducing tee connects three cold-expansion PEX lines to the F1960 standard. It suits RV plumbing repairs or new installations where a 3/4-inch branch splits from a 2-inch main. The fitting is new and ships directly from the manufacturer.

2-inch by 2-inch by 3/4-inch capacity

The tee handles full flow through the 2-inch run while the 3/4-inch outlet provides a reduced branch for fixtures or appliance feeds. It runs out when a system requires a larger branch diameter or a different connection standard such as crimp or push-fit.

F1960 cold-expansion compatibility

This part only fits cold-expansion PEX tubing and expansion rings made to the F1960 specification. It will not seal on crimp-style PEX, copper crimp rings, or any other joining method.

Highlights

  • No-lead forged brass reduces exposure risk
  • 2-inch cold-expansion PEX ends fit larger supply lines
  • 3/4-inch branch outlet serves smaller fixtures
  • ASTM F1960 expansion method creates secure joints
  • California Prop 65 warning discloses regulated chemicals

Specifications

BrandLEGEND VALVE

Questions about this item

Will the 2" and 3/4" Cold Expansion F1960 ends connect directly to my existing F1960 PEX tubing?

Yes, each end is a Cold Expansion F1960 socket that slides over F1960 PEX tubing and is secured with an F1960 expansion ring and tool.

How do I verify the tee is sealing properly after I expand the rings?

Pressurise the system and inspect each of the three joints for drips; a tight, dry connection at the 2" and 3/4" sockets confirms the expansion rings seated correctly.

Does the box include the F1960 expansion rings or just the forged brass tee?

Only the no-lead forged brass reducing tee is supplied; F1960 expansion rings and the expansion tool must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.