We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass PEX reducing tee with three cold-expansion ports

Legend Valve

Legend Valve 462-214NL 1x3/4x3/4 NL PEX Tee F1960 plumbing

SKU CH-SXZH-D3EXF

No-lead forged brass reducing tee connects 1-inch and 3/4-inch F1960 cold-expansion PEX branches

  • No-lead forged brass reduces lead exposure
  • F1960 cold-expansion connections create secure joints
  • 1 in by 3/4 in by 3/4 in reducing tee fits mixed pipe sizes
  • California Proposition 65 warning discloses chemical hazards
  • Brand Legend Valve identifies the manufacturer

Reducing Tee for PEX Systems

The Legend Valve 462-214NL is a no-lead forged brass reducing tee built for cold-expansion PEX connections under the F1960 standard. It joins three PEX lines with a 1-inch run and two 3/4-inch branches in residential or RV plumbing installations.

Capacity and Headroom

The fitting handles typical potable-water pressures and temperatures approved for F1960 cold-expansion systems. It is not intended for high-temperature hydronic heating loops or compressed-air lines that exceed the PEX tubing ratings.

No-Lead Brass and Proposition 65 Notice

The no-lead forged brass body meets lead-free requirements for drinking-water systems. California Proposition 65 warnings apply because the product contains chemicals identified by the state as causing cancer and reproductive harm.

Highlights

  • No-lead forged brass reduces lead exposure
  • F1960 cold-expansion connections create secure joints
  • 1 in by 3/4 in by 3/4 in reducing tee fits mixed pipe sizes
  • California Proposition 65 warning discloses chemical hazards
  • Brand Legend Valve identifies the manufacturer

Specifications

BrandLEGEND VALVE

Questions about this item

Will the 1-inch and 3/4-inch cold-expansion ports on this 462-214NL tee connect directly to my existing F1960 PEX tubing?

Yes — the tee has one 1-inch and two 3/4-inch F1960 cold-expansion ends, so it joins matching PEX sizes without adapters.

How can I verify the tee is sealed correctly after I make the cold-expansion connections?

Pressurise the system and check each of the three F1960 joints for leaks; a tight, drip-free seal confirms proper expansion.

Does the box include expansion rings or a tool for the F1960 connections, or must I supply them?

Only the no-lead forged-brass tee is included; F1960 expansion rings and an expansion tool are sold separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.