We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass multi-port tee with four PEX barbed connections, matte finish

Legend Valve

Legend Valve 461-323 1-1/4" Closed 3x3/4" PPSU F1960 PEX Multi-Port Tee

SKU CH-BDYQ-Y9T56

Connects a 1-1/4 inch closed PEX line to three 3/4 inch branches using F1960 PPSU construction

  • 1-1/4" closed trunk with three 3/4" branches simplifies PEX distribution
  • PPSU construction resists corrosion and scale buildup in potable water systems
  • F1960 cold-expansion compatibility ensures secure, tool-verified connections
  • Multi-port tee design reduces fitting count and potential leak paths
  • California Proposition 65 notice discloses listed chemical exposure risk

Multi-Port Tee for PEX Systems

This Legend Valve 461-323 tee connects one 1-1/4 inch closed port to three 3/4 inch outlets using F1960 cold-expansion PEX fittings. The body is moulded from PPSU polymer for corrosion resistance and long-term durability in potable-water installations. It suits residential and light-commercial plumbing manifolds.

Replaces Sweated Copper Manifolds

The composite fitting eliminates open-flame soldering and reduces the number of joints compared with traditional copper tees. Installers save labour time on new-build rough-ins and on retrofit jobs where copper access is limited. The jump is worthwhile when a single distribution point feeds three fixture runs.

Limited to F1960 Cold-Expansion Method

The tee only accepts PEX tubing expanded with an F1960 tool; it cannot be used with crimp-ring, clamp or push-fit systems. California Proposition 65 warnings apply because the material contains listed chemicals. No other connection standard or tubing type is compatible with this fitting.

Highlights

  • 1-1/4" closed trunk with three 3/4" branches simplifies PEX distribution
  • PPSU construction resists corrosion and scale buildup in potable water systems
  • F1960 cold-expansion compatibility ensures secure, tool-verified connections
  • Multi-port tee design reduces fitting count and potential leak paths
  • California Proposition 65 notice discloses listed chemical exposure risk

Specifications

BrandLEGEND VALVE

Questions about this item

What size PEX tubing does the 1-1/4" closed end and the three 3/4" ports on this Legend Valve 461-323 tee accept?

The closed end is sized for 1-1/4" PEX and each of the three ports is sized for 3/4" PEX, all using the F1960 expansion method.

Which expansion tool and ring standard must be used to install the F1960 connections on this multi-port tee?

Use an F1960-compatible expansion tool with PEX-a tubing and the correct F1960 expansion rings; the common mistake is using crimp rings or a crimp tool instead.

When should the PPSU body or the F1960 expansion rings on this tee be inspected or replaced?

Inspect the PPSU body for cracking or stress marks during any system pressure test and replace expansion rings if they show permanent deformation or if a joint is re-made.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.