We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass PEX to male thread elbow fitting, 3/4 inch connections

Legend Valve

Legend Valve 460-110NL 3/4" PEX x 3/4" Male Elbow plumbing

SKU CH-1YTG-VWJ2G

Connects 3/4 inch PEX tubing to 3/4 inch male NPT threads with a no-lead, dezincification-resistant forged brass elbow

  • No-lead brass protects drinking water
  • DZR forged brass resists dezincification corrosion
  • 3/4" PEX to male thread connects supply lines
  • California Prop 65 warning discloses chemical risk
  • Brand new fitting ready for installation

Purpose and fit

This 3/4 inch PEX by male NPT elbow connects cross-linked polyethylene tubing to a threaded male fitting in potable water systems. It suits RV plumbing repairs or new installations where a directional change is required at a fixture or manifold.

Build and connections

The body is forged from no-lead DZR brass for corrosion resistance and drinking-water safety. One end accepts 3/4 inch PEX tubing with a crimp or clamp ring, while the other provides 3/4 inch male NPT threads for screwing into a female-threaded port or adapter.

Compatibility checks

Verify that your tubing is 3/4 inch PEX and that the mating port uses 3/4 inch female NPT threads. Confirm local codes accept no-lead DZR brass for the intended application and note the Proposition 65 warning regarding listed chemicals.

Highlights

  • No-lead brass protects drinking water
  • DZR forged brass resists dezincification corrosion
  • 3/4" PEX to male thread connects supply lines
  • California Prop 65 warning discloses chemical risk
  • Brand new fitting ready for installation

Specifications

BrandLEGEND VALVE

Questions about this item

How does the MNPT thread on this elbow connect to the rest of the plumbing system?

The 3/4-inch MNPT end threads into a matching female NPT fitting or port. Wrap the male threads with PTFE tape or pipe dope before tightening to seal the joint.

What pipe size does the PEX end of this fitting accept?

The PEX barb is sized for 3/4-inch PEX tubing. Slide the tube over the barb and secure it with a crimp ring or cinch clamp using the correct tool.

What is the first step when installing this elbow onto PEX tubing?

Cut the PEX tubing square and clean with a dedicated cutter. A straight, burr-free end ensures the barb seats fully before you apply the crimp ring.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.