We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass tee valve with press and F1960 PEX connections

Legend Valve

Legend Valve 450-882P 3/4" PRESS x 1/2" F1960 Tee valve

SKU CH-80WM-V79HY

No-lead tee connects ¾" press to ½" F1960 PEX for potable-water plumbing

  • No-lead construction reduces exposure to harmful substances
  • Press-to-F1960 connections speed installation without soldering
  • Tee configuration splits flow between three ports efficiently
  • 3/4-inch press inlet fits standard plumbing supply lines
  • 1/2-inch F1960 outlet accepts compatible PEX tubing directly

Application & Purpose

The Legend Valve 450-882P is a 3/4" PRESS by 1/2" F1960 tee designed for potable water distribution. It joins a press connection on the run with an F1960 expansion branch for PEX tubing. The no-lead construction meets requirements for drinking water systems.

Installation Notes

Press ends require a compatible press tool and jaws sized for the 3/4" connection; the F1960 branch needs an expansion ring and expander tool. Using incorrect jaw sizes or skipping the expansion ring are the most common causes of leaks. The valve ships ready to install with no disassembly required.

System Limits

The fitting is rated for standard residential and commercial hot and cold water pressure and temperature ranges. California Proposition 65 warnings apply because the product contains a chemical known to the state to cause cancer and birth defects or other reproductive harm. It is not intended for gas, fuel oil or industrial chemical lines.

Highlights

  • No-lead construction reduces exposure to harmful substances
  • Press-to-F1960 connections speed installation without soldering
  • Tee configuration splits flow between three ports efficiently
  • 3/4-inch press inlet fits standard plumbing supply lines
  • 1/2-inch F1960 outlet accepts compatible PEX tubing directly

Specifications

BrandLEGEND VALVE

Questions about this item

How can I confirm the 450-882P tee is seated correctly after pressing?

The press connection should show a full, even crimp ring engagement with no visible gaps; the F1960 PEX end must expand fully over the fitting and return to its original size for a secure seal.

What comes with the 450-882P tee and what must I supply?

The tee itself is supplied; you must provide the 3/4 inch press tool, jaws, and 1/2 inch F1960 PEX tubing plus expansion rings for the branch connection.

Which Legend Valve tee matches a 3/4 inch press main with a 1/2 inch F1960 branch?

The 450-882P is the exact model for a 3/4 inch press by 1/2 inch F1960 PEX tee configuration in no-lead brass.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.