We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass press reducing tee with three copper ends

Legend Valve

Legend Valve 450-325P 3" x 3" x 2-1/2" Press Reducing Tee

SKU CH-RZGH-QMBY6

A 3" x 3" x 2-1/2" press reducing tee for joining three pipes of different diameters

  • Reducing tee connects three different pipe sizes
  • 3" x 3" x 2-1/2" press-fit dimensions
  • Model 450-325P identifies exact fitting specification
  • New condition ensures clean, undamaged sealing surfaces
  • Prop 65 warning discloses regulated chemical content

Press Reducing Tee 3" x 3" x 2-1/2

This press reducing tee joins three pipes in a T configuration with a smaller branch outlet. The fitting is manufactured by Legend Valve for press-connect plumbing systems. It arrives new and ships directly from the maker. California Proposition 65 warnings apply for cancer and reproductive harm.

For installers using press tools

Suits plumbers and contractors assembling water or hydronic piping with press fittings. The reducing branch allows a direct step-down without extra couplings. Not for installers who only have solder or thread equipment. Not for systems requiring a straight coupling or an elbow instead of a tee.

3" run with 2-1/2" branch

The run ports are both 3 inches and the branch port is 2-1/2 inches. This single sizing fact determines whether the fitting matches the pipe diameters on the job. Verify the three measurements against your layout before purchasing.

Highlights

  • Reducing tee connects three different pipe sizes
  • 3" x 3" x 2-1/2" press-fit dimensions
  • Model 450-325P identifies exact fitting specification
  • New condition ensures clean, undamaged sealing surfaces
  • Prop 65 warning discloses regulated chemical content

Specifications

BrandLEGEND VALVE

Questions about this item

How is the 3" x 3" x 2-1/2" press reducing tee installed, and what step do people often get wrong?

Use a calibrated press tool with the correct jaw size for each connection; the common error is pressing before the tube is fully seated and square in the fitting.

What maintenance or replacement will the 450-325P press reducing tee need later?

The press joints are permanent; inspect for leaks or corrosion periodically and replace the tee only if a joint fails or the system is redesigned.

What limit appears first on the 3" x 3" x 2-1/2" press reducing tee under sustained use?

The California Proposition 65 warning indicates chemical content; the practical limit is the pressure rating of the connected tubing and the press joint integrity.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.