We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper press reducing tee with three ports and brushed metal finish

Legend Valve

Legend Valve 450-322P 3 x 3 x 1-1/4 Press Reducing Tee

SKU CH-BMYB-ZVJB6

Press reducing tee joins 3-inch and 1-1/4-inch lines in plumbing systems

  • Reduces flow from 3" mains to 1-1/4" branch
  • Press connection installs without solder or flame
  • Legend Valve brand backs professional plumbing installs
  • New condition ensures clean, unused fitting surfaces
  • California Prop 65 warning disclosed for compliance

Press Reducing Tee 3 x 3 x 1-1/4

The Legend Valve 450-322P is a press-fit reducing tee that joins three-inch mains to a one-and-a-quarter-inch branch in water or hydronic systems. Plumbers and mechanical contractors use it to create a smaller take-off without threading or soldering. The fitting is supplied new and carries California Proposition 65 warnings for cancer and reproductive-harm chemicals.

Installation notes and common issues

Press installation requires a compatible press tool and jaw set matched to the fitting size; the tool must be calibrated and the jaw clean to avoid incomplete crimps. Debris on the pipe end or an under-inserted tube are the most frequent causes of leaks, so each joint should be visually inspected and pressure tested before the system is closed up.

Press-fit system limits

The joint relies on the mechanical press profile and the internal sealing element, so system pressure and temperature must stay within the ratings of the press system used. The fitting cannot be disassembled or reused once pressed, and it is not suitable for applications that require a threaded or flanged connection for future maintenance access.

Highlights

  • Reduces flow from 3" mains to 1-1/4" branch
  • Press connection installs without solder or flame
  • Legend Valve brand backs professional plumbing installs
  • New condition ensures clean, unused fitting surfaces
  • California Prop 65 warning disclosed for compliance

Specifications

BrandLEGEND VALVE

Questions about this item

How can I verify the 450-322P press reducing tee is seated correctly after pressing?

Visually confirm the press indicator ring on each of the three connections shows full engagement and run a pressure test to check for leaks at the 3" x 3" x 1-1/4" joints.

What components come with the 450-322P tee and what must I supply?

The box contains the Legend Valve press reducing tee only; you must provide compatible press tools, jaws for 3" and 1-1/4" sizes, and any required pipe or tubing.

Which Legend Valve press reducing tee matches a 3" x 3" x 1-1/4" press connection?

The 450-322P model is the exact fitting for a 3" x 3" x 1-1/4" large press reducing tee configuration.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.