We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bronze press reducing tee with three ports, matte finish

Legend Valve

Legend Valve 450-305P 3" x 1" x 3" Press Reducing Tee

SKU CH-71T5-2SZVY

A press reducing tee connects 3-inch and 1-inch pipes in plumbing systems

  • Reducing tee connects 3" and 1" pipe sizes
  • Press-fit design speeds installation without soldering
  • Lead-free construction meets Prop 65 safety standards
  • Durable brass body resists corrosion in plumbing systems
  • Compact 450-305P model fits tight mechanical spaces

Product Identity

The Legend Valve 450-305P is a 3" x 1" x 3" press reducing tee designed for plumbing installations. It connects pipes of different diameters using a press-fit method. This component is new and supplied directly by the manufacturer.

Suitability

This fitting suits installers joining a 1" branch to a 3" main line with press tooling. It is not for technicians who require threaded, soldered or push-fit connections. It also does not fit systems where all three ports must share the same diameter.

Critical Specification

The defining specification is the 3" x 1" x 3" sizing combined with the press connection style. Confirm that your pipe diameters and pressing equipment match this exact configuration before purchase. The product carries a California Proposition 65 warning for chemicals known to cause cancer and reproductive harm.

Highlights

  • Reducing tee connects 3" and 1" pipe sizes
  • Press-fit design speeds installation without soldering
  • Lead-free construction meets Prop 65 safety standards
  • Durable brass body resists corrosion in plumbing systems
  • Compact 450-305P model fits tight mechanical spaces

Specifications

BrandLEGEND VALVE

Questions about this item

What pipe sizes does the 450-305P reducing tee connect?

The tee joins a 3 inch main run with a 1 inch branch outlet using press ends on all three ports.

Which press tool jaw profile is required for the 450-305P, and what is the common alignment mistake?

Use the manufacturer-specified large press jaw for 3 inch and 1 inch fittings; the frequent error is rotating the branch port off-centre before pressing, which prevents a full seal.

When should the 450-305P tee be inspected or replaced after installation?

Inspect the pressed joints after the first pressure test and then annually; replace the fitting if any press ring shows cracking, corrosion or leakage at the seal.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.