We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass press reducing tee with three copper-coloured ends

Legend Valve

Legend Valve 450-259P Press Reducing Tee 1/2 x 1/2 x 3/4

SKU CH-E14S-VD1PN

A 1/2 x 1/2 x 3/4 press reducing tee joins three pipes in a single fitting

  • Press reducing tee connects 1/2" run with 3/4" branch for flexible piping
  • Legend Valve brand delivers reliable plumbing components for professional installations
  • Press-fit design enables secure joints without soldering or threading tools
  • Model 450-259P identifies exact fitting specification for accurate ordering
  • California Proposition 65 notice discloses chemical content for informed handling

Press Reducing Tee 1/2 x 1/2 x 3/4

The Legend Valve 450-259P is a press reducing tee designed for plumbing installations. It connects two 1/2 inch ports with a 3/4 inch branch in a single fitting. The new component suits professionals and DIYers joining copper tubing of different diameters. California Proposition 65 warnings apply for cancer and reproductive harm.

Replaces soldered or threaded reducing tees

This fitting replaces traditional soldered or threaded reducing tees in copper systems. The jump is worth it when faster installation and a flameless joint are required on site. Press technology eliminates the need for torches, flux or thread sealant during assembly. The 450 series design supports standard press tools for reliable connections.

Handles 1/2 and 3/4 inch copper tubing

The tee comfortably handles standard 1/2 inch and 3/4 inch copper tubing in hot and cold water lines. It runs out when pipe diameters fall outside the stated 1/2 x 1/2 x 3/4 inch configuration. Larger or smaller branch sizes demand a different fitting model for proper flow. The press connection provides a permanent seal on approved tubing.

Highlights

  • Press reducing tee connects 1/2" run with 3/4" branch for flexible piping
  • Legend Valve brand delivers reliable plumbing components for professional installations
  • Press-fit design enables secure joints without soldering or threading tools
  • Model 450-259P identifies exact fitting specification for accurate ordering
  • California Proposition 65 notice discloses chemical content for informed handling

Specifications

BrandLEGEND VALVE

Questions about this item

What pipe sizes does the 1/2 x 1/2 x 3/4 press reducing tee connect?

The tee joins two 1/2-inch press connections on the run with a 3/4-inch press connection on the branch for a reducing layout.

Which press tool jaw profile is required to install the 450-259P tee?

Use a press tool and jaw set approved for the tee's press-fit system; the joint is completed when the tool fully closes the jaw around each fitting end.

How do I verify the tee remains leak-free after the system is pressurised?

Pressurise the line and inspect each of the three press connections for moisture; a dry joint confirms the press was made correctly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.