We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass press-fit reducing tee with red identification ring

Legend Valve

Legend Valve 450-225P 2" x 1" Press Red Tee valve

SKU CH-EJEY-GEAE6

Press reducing tee joins 2" mains with a 1" branch for copper piping systems

  • 2" x 1" press reducing tee simplifies pipe transitions
  • Legend Valve brand backs reliable plumbing performance
  • New condition ensures clean, uncontaminated installation
  • Press connection method speeds up fitting time
  • California Proposition 65 notice informs safe handling practices

Legend Valve 450-225P press reducing tee

This press reducing tee connects 2" and 1" piping in plumbing installations. It is a new component supplied by Legend Valve for professional or DIY pipework. The fitting creates a branched connection where the run and branch diameters differ. California Proposition 65 warnings apply because the product contains listed chemicals.

Sustained pressure performance

The brass construction resists corrosion during continuous water or hydronic system operation. Press connections form a permanent mechanical seal that does not loosen under thermal cycling or vibration. No soldering or threading is required, reducing installation time on pressurised lines. The fitting maintains integrity at the system design pressure.

Pre-installation checks

Verify that your press tool and jaw set match the 2" and 1" press-profile specifications for this fitting. Confirm the pipe material and outer diameter are compatible with the press system being used. Ensure the piping layout accommodates the reducing tee geometry without inducing stress on the joints. California Proposition 65 compliance may require user notification.

Highlights

  • 2" x 1" press reducing tee simplifies pipe transitions
  • Legend Valve brand backs reliable plumbing performance
  • New condition ensures clean, uncontaminated installation
  • Press connection method speeds up fitting time
  • California Proposition 65 notice informs safe handling practices

Specifications

BrandLEGEND VALVE

Questions about this item

Does the 450-225P valve generate any noise, heat or power draw when installed in a pressurised system?

The 450-225P is a passive press fitting with no moving parts, so it produces no operational noise, no heat and draws no power once the system is running.

What pipe sizes and press tools must I already own to install this 2" x 1" reducing tee?

You need 2-inch and 1-inch press-compatible tubing plus a press tool fitted with the correct 2-inch and 1-inch jaw sets for the 450-225P.

Will the 450-225P press tee seal reliably against older copper or stainless pipe that is already in the building?

Yes, the 450-225P is designed to press onto standard 2-inch and 1-inch tubing diameters, so it will seal on existing pipe of the same nominal size and compatible material.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.