We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass press reducing tee with three differently sized ports

Legend Valve

Legend Valve 450-205P Press Reducing Tee

SKU CH-K91X-9NA77

Press reducing tee connects 1", 3/4" and 1/2" tubing in plumbing systems

  • Press reducing tee joins three pipe sizes in one fitting
  • 1" x 3/4" x 1/2" configuration simplifies branching installations
  • Press connection method enables fast, flame-free assembly
  • Legend Valve brand supplies professional-grade plumbing components
  • California Proposition 65 warning applies to this product

Press Reducing Tee

The Legend Valve 450-205P press reducing tee connects 1 inch, 3/4 inch and 1/2 inch tubing in a single press-fit junction. It is built for professional plumbing installations that require a secure, leak-free transition between three different pipe sizes without soldering or threading.

Replaces soldered or threaded tees

This press tee replaces traditional soldered or threaded reducing tees, eliminating open flame and reducing installation time on copper or compatible piping systems. The jump is worth it when a project demands faster assembly, consistent joint quality and compliance with modern press-fit standards.

Suits installers using press tools

The fitting suits installers equipped with press tools who need a reliable reducing tee for potable water or hydronic systems. Buyers without access to a compatible press tool or who require a different size combination should look at alternative connection methods.

Highlights

  • Press reducing tee joins three pipe sizes in one fitting
  • 1" x 3/4" x 1/2" configuration simplifies branching installations
  • Press connection method enables fast, flame-free assembly
  • Legend Valve brand supplies professional-grade plumbing components
  • California Proposition 65 warning applies to this product

Specifications

BrandLEGEND VALVE

Questions about this item

What pipe sizes does the 1" x 3/4" x 1/2" press reducing tee connect?

The tee joins a 1-inch run, a 3/4-inch branch and a 1/2-inch outlet using press fittings on all three ports.

Which press tool and jaw set are required to install the 450-205P tee?

Use a compatible press tool with jaws sized for 1-inch, 3/4-inch and 1/2-inch tubing; the common mistake is pressing only two ports and leaving the third unsealed.

When should the reducing tee be inspected or replaced after installation?

Inspect joints after the first pressure test and annually thereafter; replace the tee if any press connection shows leakage, corrosion or deformation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.