We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
3 inch copper press 45 degree elbow valve bronze finish

Legend Valve

Legend Valve 450-030P 3" Copper Press 45° Elbow Valve

SKU CH-3Y9B-1YPNK

Three-inch copper press elbow forms a 45-degree turn in plumbing systems

  • 3" copper press elbow creates secure 45° turns
  • Press-fit design eliminates soldering for faster installs
  • 30-year Legend Valve reputation backs reliability
  • Lead-free compliant for potable water safety
  • California Prop 65 chemical warning applies

3-inch Copper Press 45° Elbow Valve

The Legend Valve 450-030P is a 3-inch copper press fitting designed to change pipe direction by 45 degrees. It suits plumbing professionals and experienced DIYers working on water distribution systems that use large-diameter copper tubing.

Press-tool installation with no threading

Installation uses a compatible press tool to create a permanent, leak-resistant joint without solder, flux or thread sealant. Common errors include pressing with worn jaws, skipping the depth mark check, or rotating the fitting after the press cycle has started.

Verify tubing size and system pressure

Confirm the existing copper tubing measures exactly 3 inches outside diameter and is approved for press connections. Check that the system operating pressure falls within the fitting's rated limits and that local codes permit press joints for the intended application.

Highlights

  • 3" copper press elbow creates secure 45° turns
  • Press-fit design eliminates soldering for faster installs
  • 30-year Legend Valve reputation backs reliability
  • Lead-free compliant for potable water safety
  • California Prop 65 chemical warning applies

Specifications

BrandLEGEND VALVE

Questions about this item

How do I confirm the 45° angle is seated correctly after pressing the 3" copper connection?

After pressing, the elbow should sit flush with the pipe run at a true 45° turn; a visual check of the joint alignment and a pressure test will confirm it is working as intended.

What comes with the 450-030P valve and what must I source separately?

The box contains the 3" copper press 45° elbow valve only; copper tubing, press jaws and any required sealant or hangers are purchased separately.

Which version of the 450-030P should I choose for a standard 3" copper press installation?

The 450-030P is a single 3" large press 45° elbow model; select it when your system calls for a 3" copper press fitting at a 45° angle.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.