We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass 90-degree long-radius press elbow, 1-1/4 inch

Legend Valve

Legend Valve 450-006P 1-1/4" Press 90° Elbow Long Radius

SKU CH-8XPR-VQJPR

Connects 1-1/4" press piping with a long-radius 90° turn for smoother flow

  • 1-1/4" press connection fits copper tube without soldering
  • Long-radius 90° elbow reduces turbulence and pressure drop
  • New Legend Valve fitting meets professional plumbing standards
  • California Proposition 65 notice discloses regulated chemical content
  • Model 450-006P identifies the exact press elbow for ordering

Plumbing Valve for Press Connections

This 1-1/4" press 90° elbow suits installers building potable-water or hydronic systems with press-fit copper or stainless tubing. The long-radius bend reduces turbulence and pressure drop compared with short-radius alternatives. It is supplied new and intended for permanent, leak-free joints made with compatible press tools.

Long-Radius Geometry and Press Ends

The extended curve eases flow through directional changes, which helps maintain system efficiency in heating and cooling loops. Press ends eliminate the need for solder, flux or open flame, cutting installation time and fire risk on site. California Proposition 65 warnings apply because the fitting contains a listed chemical.

Limits of Press-Fit Installation

The fitting works only with tubing and press jaws matched to the 1-1/4" size; mismatched tools or pipe will not seal. It cannot be disassembled or reused once pressed, so layout must be final before crimping. No threads, flanges or solder cups are provided for alternative connection methods.

Highlights

  • 1-1/4" press connection fits copper tube without soldering
  • Long-radius 90° elbow reduces turbulence and pressure drop
  • New Legend Valve fitting meets professional plumbing standards
  • California Proposition 65 notice discloses regulated chemical content
  • Model 450-006P identifies the exact press elbow for ordering

Specifications

BrandLEGEND VALVE

Questions about this item

Does the 90° press elbow require a specific press tool standard for the 1-1/4" connection?

The elbow uses a press connection; install with a press tool and jaw set matched to the 1-1/4" tubing system you are using.

What tubing outside diameter does the 1-1/4" press end accept?

The press end is sized for 1-1/4" nominal tubing; verify the exact outside diameter against the tubing manufacturer's data before pressing.

What is the correct insertion depth step that installers often miss on a long-radius press elbow?

Mark the full insertion depth on the tube, push until the mark reaches the fitting shoulder, then press — skipping the depth mark causes shallow joints.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.