Legend Valve
Legend Valve 356-236E 4" x 12" Schedule 40 Galvanized Nipple
4" x 12" Schedule 40 galvanized nipple connects threaded pipe runs in plumbing systems
- Schedule 40 rating handles high-pressure plumbing demands
- Galvanised coating resists corrosion for longer service life
- 12 inch length suits standard pipe runs
- 4 inch diameter fits matching fittings directly
- Proposition 65 notice confirms regulated material disclosure
Product identity
This is a 4-inch by 12-inch Schedule 40 galvanized nipple from Legend Valve. It is a short pipe section with male threads on both ends, used to join two female-threaded fittings in plumbing systems. The component is new and supplied as a single length.
Deciding specification
The Schedule 40 wall thickness determines the pressure rating and mechanical strength of this nipple. Match this schedule to the rest of the piping system so that threads engage correctly and the assembly holds the required working pressure. A different schedule will not seal properly on the same fittings.
Installation notes
Thread the nipple into the two female fittings using pipe-thread sealant or tape approved for galvanized steel. Over-tightening can crack the fitting or strip the threads, while under-tightening leaves a leak path. The California Proposition 65 notice indicates the presence of chemicals linked to cancer and reproductive harm; wear gloves and wash hands after handling.
Highlights
- Schedule 40 rating handles high-pressure plumbing demands
- Galvanised coating resists corrosion for longer service life
- 12 inch length suits standard pipe runs
- 4 inch diameter fits matching fittings directly
- Proposition 65 notice confirms regulated material disclosure
Specifications
| Brand | LEGEND VALVE |
|---|
Questions about this item
What does the 4-inch by 12-inch size mean when the nipple is installed?
The nipple provides a 12-inch length of 4-inch nominal pipe with Schedule 40 wall thickness for standard galvanized piping runs.
What does the Schedule 40 rating cap in terms of pressure handling?
Schedule 40 defines the wall thickness that determines the pressure rating for this galvanized nipple in standard plumbing service.
What threading standard lets this nipple connect to other fittings?
The nipple uses standard NPT threads on both ends to join 4-inch galvanized pipe and fittings.
More in Hoses, Pipes & Tubing
Similar items
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Beck C. H.
Beck C. H. 3" MNPT x 6" TBE Galvanized Steel Pipe Nipple Sch 40
- Black/Blue
$38.99
0.00046499BTC
In stock
