We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanized reducing tee with three female threaded openings

Legend Valve

Legend Valve 352-290C Galvanized Reducing Tee

SKU CH-B1GM-W9RXF

Galvanised reducing tee connects three female NPT pipes at two different diameters

  • Galvanized steel resists corrosion for long service life
  • Reducing tee connects 1-1/2", 1-1/2" and 2" NPT threads
  • Female NPT threads on all three ends simplify installation
  • Brand 352-290C identifies the fitting for reordering
  • California Proposition 65 warning notes chemical hazards

Reducing Tee for Plumbing Systems

This galvanised reducing tee connects three female NPT threads at 1-1/2, 1-1/2 and 2 inches. It suits installers joining pipes of different diameters in water or gas distribution networks. The fitting is manufactured in China and supplied new for residential or commercial plumbing work.

Corrosion Resistance and Flow Characteristics

The galvanised coating protects the steel body against rust in normal service conditions. Internal threads accept standard NPT pipe ends without additional sealing compounds beyond normal thread tape. Pressure drop across the branch follows typical tee geometry for the stated diameters.

Installation Requirements and Layout Benefits

The fitting requires male NPT pipe nipples or pipes threaded to match the three ports. No specialised tools beyond standard pipe wrenches are needed for assembly. The reducing branch allows a direct transition from a 2-inch main to 1-1/2-inch distribution lines without separate bushings.

Highlights

  • Galvanized steel resists corrosion for long service life
  • Reducing tee connects 1-1/2", 1-1/2" and 2" NPT threads
  • Female NPT threads on all three ends simplify installation
  • Brand 352-290C identifies the fitting for reordering
  • California Proposition 65 warning notes chemical hazards

Specifications

BrandLEGEND VALVE

Questions about this item

How do I install the 1-1/2" x 1-1/2" x 2" galvanized reducing tee and what step is often missed?

Thread each FNPT end onto the matching pipe using thread sealant, then tighten with a wrench; the step often missed is applying enough sealant on every thread to prevent leaks.

What maintenance or replacement will this galvanized tee need over time?

Inspect the galvanized coating periodically for rust or white corrosion; if the coating fails and the steel underneath corrodes, replace the tee to avoid leaks.

What limit appears first on this tee under sustained pressure and flow?

The zinc coating is the first limit; prolonged exposure to aggressive water or high velocity flow can erode the galvanising, leading to corrosion and eventual joint failure.

More in Fittings & Couplings

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.