Legend Valve
Legend Valve 350-273 1-1/4 x 1-1/4 x 1-1/2 BL RED T valve
A 1-1/4 by 1-1/4 by 1-1/2 inch black reducing tee with female NPT connections for pipe manifolds
- T-valve design simplifies three-way piping connections
- 1-1/4 x 1-1/4 x 1-1/2 inch reducing tee fits mixed-size lines
- SA black finish resists corrosion in outdoor systems
- FNPT threads on all three ports ensure leak-free joints
- California Proposition 65 warning informs safe handling practices
Legend Valve 350-273 T fitting
This Legend Valve 350-273 is a reducing tee designed for fluid distribution systems. It features a 1-1/4 x 1-1/4 x 1-1/2 inch configuration with FNPT threads on all three ports. The black and red finish identifies the component in mixed piping layouts. It is supplied new and intended for professional or residential plumbing installations.
Suited for reducing branch connections
Installers who need to step down from a 1-1/4 inch main line to a 1-1/2 inch branch will find this tee matches that requirement. The FNPT threads allow direct connection to standard threaded pipe without adapters. Buyers who require a straight coupling, a different thread type, or a larger branch size should select an alternative fitting.
Straightforward threaded installation
The tee installs by threading onto male NPT pipe ends using standard pipe sealant or tape. Ensure threads are clean and properly aligned to avoid cross-threading which can damage the cast body. Over-tightening may crack the fitting so apply only enough torque to seal the joint. The Proposition 65 notice indicates the product contains listed chemicals so handle with appropriate precautions.
Highlights
- T-valve design simplifies three-way piping connections
- 1-1/4 x 1-1/4 x 1-1/2 inch reducing tee fits mixed-size lines
- SA black finish resists corrosion in outdoor systems
- FNPT threads on all three ports ensure leak-free joints
- California Proposition 65 warning informs safe handling practices
Specifications
| Brand | LEGEND VALVE |
|---|
Questions about this item
What pipe threads must I already have to connect the 350-273 reducing tee?
The tee requires three female NPT threads — two at 1-1/4 inch and one at 1-1/2 inch — so your existing piping must match those sizes.
Will the 350-273 tee work with my older black iron or galvanised fittings?
Yes, the SA black finish and standard FNPT threads are compatible with traditional black iron and galvanised pipe of the same nominal sizes.
How can I verify the 350-273 tee is sealed correctly after installation?
Pressurise the system and check each of the three FNPT joints for leaks; a properly threaded and sealed tee will hold pressure without weeping.
More in Manifolds & Valves
Similar items
Same shelf, same checkout — eight coins and a 30-minute rate lock.
