We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 90 degree reducing elbow with female NPT threads

Legend Valve

Legend Valve 350-124 2" x 1" Black Red 90° Reducing Elbow FNPT x FNPT tubing

SKU CH-NWN0-HYF1T

A 90° reducing elbow joins 2" and 1" FNPT threads for plumbing connections

  • Black 90° reducing elbow connects 2" to 1" FNPT threads
  • Female NPT both ends simplify installation in tight spaces
  • Legend Valve model 350-124 built for plumbing systems
  • California Prop 65 notice flags chemical exposure risk
  • SA construction suits standard piping applications

2" x 1" Reducing Elbow 90°

This Legend Valve 350-124 fitting joins a two-inch female NPT pipe to a one-inch female NPT pipe at a ninety-degree angle. The black and red SA body is supplied new and carries a California Proposition 65 notice for chemicals linked to cancer and reproductive harm.

Plumbing installs needing a 90° size change

It suits installers who must reduce from two-inch to one-inch pipe while turning a corner in water, air or inert-gas lines. Buyers who need a straight reducer, a coupling between equal diameters, or a different thread type should select another fitting.

90° FNPT x FNPT reducing geometry

The single deciding specification is the ninety-degree elbow that connects two-inch FNPT to one-inch FNPT in one piece. Match both the angle and the two thread sizes to your piping plan before ordering.

Highlights

  • Black 90° reducing elbow connects 2" to 1" FNPT threads
  • Female NPT both ends simplify installation in tight spaces
  • Legend Valve model 350-124 built for plumbing systems
  • California Prop 65 notice flags chemical exposure risk
  • SA construction suits standard piping applications

Specifications

BrandLEGEND VALVE

Questions about this item

How do I install the 350-124 2" x 1" reducing elbow and what step causes leaks?

Wrap PTFE tape clockwise on the 2" and 1" male threads, hand-tighten both FNPT ends, then add one to two turns with a pipe wrench; the common error is skipping tape or over-tightening, which cracks the fitting.

What maintenance or replacement will the 350-124 elbow need later?

Inspect the black finish and threads annually for corrosion or mineral build-up; replace the elbow if you see cracks, stripped threads or persistent seepage at either FNPT joint.

What limit appears first on the 350-124 elbow under sustained pressure and heat?

The 90° reducing geometry creates the highest stress at the inner radius, so thread deformation or hairline cracking at the 1" FNPT port typically shows up before the bulk material yields.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.