We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
1/2 inch by 10 inch 316 stainless steel pipe nipple

Legend Valve

Legend Valve 316-074 1/2" x 10" 316 SS Nipple laboratory supply

SKU CH-328N-6MCW0

316 stainless steel pipe nipple measuring 1/2 inch by 10 inches for laboratory fluid connections

  • 316 stainless steel resists corrosion in harsh lab environments
  • 10 inch length fits standard laboratory piping configurations
  • 1/2 inch diameter connects to common lab supply fittings
  • New condition ensures clean, uncontaminated fluid pathways
  • California Proposition 65 warning discloses regulated chemical content

Laboratory Stainless Steel Nipple

This 316 stainless steel pipe nipple is manufactured by Legend Valve for laboratory supply applications. The component provides a corrosion-resistant connection point for fluid or gas transfer systems. It is intended for technicians and engineers who require a durable, chemically resistant fitting for custom piping assemblies.

1/2 Inch Diameter by 10 Inch Length

The critical specification is the nominal pipe size of 1/2 inch combined with an overall length of 10 inches. These dimensions determine compatibility with existing threaded fittings and the required spacing within the piping layout. Verify both measurements against your system design before installation.

California Proposition 65 Compliance Notice

The product carries a California Proposition 65 warning indicating it contains chemicals known to the state to cause cancer and birth defects or other reproductive harm. This regulatory notice informs safe handling procedures and documentation requirements for workplace safety programs. No additional accessories or software are bundled with this fitting.

Highlights

  • 316 stainless steel resists corrosion in harsh lab environments
  • 10 inch length fits standard laboratory piping configurations
  • 1/2 inch diameter connects to common lab supply fittings
  • New condition ensures clean, uncontaminated fluid pathways
  • California Proposition 65 warning discloses regulated chemical content

Specifications

BrandLEGEND VALVE

Questions about this item

What does the 10 inch length mean once the nipple is threaded into a piping system?

The 10 inch dimension is the overall length from end to end; once threaded into fittings the installed length will be slightly shorter due to thread engagement.

What pipe thread standard does the 1/2 inch size follow and what does it cap in practice?

The 1/2 inch size follows NPT taper threads, which seal on the flanks and limit the maximum working pressure to the rating of the 316 stainless material and the mating fitting.

What physical clearance is needed to fit the 1/2 inch by 10 inch nipple into an assembly?

You need a straight run of at least 10 inches plus enough access for a pipe wrench on the hex sections to tighten the tapered threads.

More in Laboratory Supplies

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.