Legend Valve
Legend Valve 313-252NL 1 x 3/4 PEP NL PAK x CTS T4325 coupling
Connects 1 inch PEP pipe to 3/4 inch CTS tubing using no-lead bronze T-4325NL union
- No-lead bronze construction meets health regulations
- 1 in x 3/4 in size connects PEP and CTS pipes
- Pack joint union design allows quick installation
- T-4325NL model rated for potable water systems
- New condition ensures full manufacturer performance
Legend Valve 313-252NL PEP x CTS Coupling
This new brass coupling connects 1-inch PEP pipe to 3/4-inch CTS tubing using pack-joint ends. The T-4325NL no-lead bronze body meets Proposition 65 disclosure requirements. It suits residential and light-commercial water lines. Installers get a straight union without soldering.
Suits PEP-to-CTS transitions; not for other combos
Plumbers joining 1-inch PEP to 3/4-inch CTS pipe will find the correct ends here. The pack-joint design avoids threading or sweating copper. Buyers needing different pipe materials, diameters, or thread types must select another fitting. This unit does not adapt to those configurations.
No-lead bronze T-4325NL body
The fitting uses a no-lead bronze alloy designated T-4325NL to satisfy California Proposition 65 limits. This material choice is the deciding factor for potable-water compliance. Confirm local code acceptance before purchase. No other alloy or leaded variant is supplied.
Highlights
- No-lead bronze construction meets health regulations
- 1 in x 3/4 in size connects PEP and CTS pipes
- Pack joint union design allows quick installation
- T-4325NL model rated for potable water systems
- New condition ensures full manufacturer performance
Specifications
| Brand | LEGEND VALVE |
|---|
Questions about this item
What pipe sizes must I already have for the 1 x 3/4 PEP x CTS T4325 coupling to connect?
You need one 1 inch PEP pipe end and one 3/4 inch CTS pipe end; the union joins those two sizes directly.
Will the no-lead bronze union work with older leaded-bronze fittings already in the system?
Yes, the T4325NL no-lead bronze threads seal against existing leaded-bronze pack-joint fittings without galvanic issues.
How can I confirm the 313-252NL coupling is seated and leak-free after assembly?
Pressurise the line and inspect both pack-joint nuts; no water should escape from the gasket seats when the system is at working pressure.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor Made 12" x 18" Jolly Roger Novelty Flag 1818 marine electronic
- Accessories



