We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
No-lead bronze reducing tee, threaded female ends

Legend Valve

Legend Valve 310-428NL 1-1/4" x 1" no-lead reducing tee

SKU CH-39AW-C0J9V

Connects 1-1/4" and 1" female NPT pipes with no-lead cast bronze construction

  • No-lead bronze reduces exposure risk
  • 1-1/4" x 1" FNPT fits mixed pipe sizes
  • Cast bronze body resists corrosion
  • Threaded connections simplify installation
  • Prop 65 notice discloses chemical content

Application & Fit

This Legend Valve reducing tee connects a 1-1/4 inch line to a 1 inch branch with three FNPT ports. The no-lead cast bronze body meets California Proposition 65 requirements for potable water systems. Installers use it to step down pipe size in irrigation, hydronic or plumbing manifolds where threaded joints are required.

Who It Suits

Contractors and maintenance crews needing a lead-free threaded transition between 1-1/4 and 1 inch copper or steel pipe will find the correct fit here. Buyers who require a straight coupling, a different reduction ratio, solder ends or a certified pressure rating should look at other fittings.

Deciding Specification

The single specification that decides fit is the 1-1/4" x 1" FNPT x FNPT x FNPT thread configuration. Match those exact nominal sizes and thread type to your existing piping before ordering.

Highlights

  • No-lead bronze reduces exposure risk
  • 1-1/4" x 1" FNPT fits mixed pipe sizes
  • Cast bronze body resists corrosion
  • Threaded connections simplify installation
  • Prop 65 notice discloses chemical content

Specifications

BrandLEGEND VALVE

Questions about this item

How do I install the 1-1/4" x 1" no-lead reducing tee, and what step do people often miss?

Thread each FNPT end onto the matching pipe using thread sealant rated for potable water; the step often missed is confirming the 1" outlet aligns with the branch line before final tightening.

What maintenance or replacement will the reducing tee need later?

Inspect the cast bronze body and threads annually for mineral buildup or corrosion; replace the tee if you see cracking, persistent leaks, or green patina that cannot be cleaned.

What limit appears first on the reducing tee under sustained pressure and flow?

The cast bronze body and FNPT threads set the practical limit; sustained pressure near the rated maximum can cause thread deformation or stress corrosion before the material itself yields.

More in Manifolds & Valves

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.