We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bronze 90 degree street elbow with threaded ends

Legend Valve

Legend Valve 310-047NL 1-1/2" 90° Street Elbow Coupling

SKU CH-K86F-RTQX3

A 1-1/2 inch no-lead bronze 90 degree street elbow connects FNPT to MNPT threads in plumbing systems

  • No-lead bronze protects drinking water
  • 90° street elbow routes pipe around tight corners
  • 1-1/2" FNPT x MNPT threads connect without adapters
  • Cast bronze construction resists corrosion and pressure
  • California Prop 65 listed for chemical transparency

Application & Fit

This 1-1/2 inch 90-degree street elbow connects a female NPT thread to a male NPT thread, allowing a right-angle change of direction in plumbing systems. It is intended for installers and maintenance crews who need a compact, no-lead bronze fitting for potable water or hydronic lines.

Material & Compliance

The cast bronze body meets no-lead requirements and carries California Proposition 65 warnings for chemicals linked to cancer and reproductive harm. No thermal, noise or power-draw data apply to this passive mechanical component.

Deciding Specification

The FNPT by MNPT thread configuration and 1-1/2 inch nominal size determine whether the elbow matches the existing piping. Verify both thread gender and diameter before ordering.

Highlights

  • No-lead bronze protects drinking water
  • 90° street elbow routes pipe around tight corners
  • 1-1/2" FNPT x MNPT threads connect without adapters
  • Cast bronze construction resists corrosion and pressure
  • California Prop 65 listed for chemical transparency

Specifications

BrandLEGEND VALVE

Questions about this item

How do I install the 1-1/2" 90° street elbow and what step is often missed?

Clean both FNPT and MNPT threads, apply PTFE tape or pipe dope to the male threads only, then tighten the joint until the faces seat firmly; the step most often missed is skipping thread sealant, which leads to leaks under pressure.

What maintenance or replacement will the no-lead bronze elbow need over time?

The cast bronze body resists corrosion in potable water; inspect joints annually for seepage or green patina, and replace the fitting only if threads are damaged or the elbow shows stress cracks from vibration or freeze cycles.

What limit appears first when the elbow is under sustained pressure and temperature?

The pressure class of the connected piping governs the system; the bronze elbow itself handles standard plumbing pressures, so the first limit reached is usually the pipe or pump rating rather than the 90° street elbow.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.