Legend Valve
Legend Valve 302-205NL 1" x 3/4" T-570 Monoflow Tee No Lead Cast Brass
A no-lead cast brass Monoflow tee connects 1" and 3/4" piping for hydronic heating distribution
- No-lead brass construction for safer potable water systems
- 1" x 3/4" T-570 monoflow tee simplifies hydronic loop connections
- Cast brass body resists corrosion in heating applications
- Legend Valve 302-205NL model ensures reliable flow distribution
- California Proposition 65 warning indicates chemical disclosure compliance
1" x 3/4" Monoflow Tee for Hydronic Systems
The Legend Valve 302-205NL is a T-570 Monoflow Tee designed for hydronic heating installations. Its no-lead cast brass construction meets low-lead requirements for potable water applications. The fitting connects a 1 inch main line to a 3/4 inch branch circuit. It suits residential and light commercial hydronic loops.
Sweated Joint Installation and Flow Orientation
The tee installs via soldered sweat connections on all three ports. Correct orientation is critical; the monoflow venturi must face the supply direction to induce flow into the branch. Reversing the fitting will prevent radiation heating. Proper flux and lead-free solder are required for the no-lead brass alloy.
Sustained Hot-Water Circulation Behaviour
Under continuous circulation the brass body withstands typical hydronic temperatures and pressures without deformation. The venturi geometry maintains a consistent pressure differential to sustain branch flow during long heating cycles. No-lead alloy resists dezincification in treated water systems. California Proposition 65 warnings apply for chemical content.
Highlights
- No-lead brass construction for safer potable water systems
- 1" x 3/4" T-570 monoflow tee simplifies hydronic loop connections
- Cast brass body resists corrosion in heating applications
- Legend Valve 302-205NL model ensures reliable flow distribution
- California Proposition 65 warning indicates chemical disclosure compliance
Specifications
| Brand | LEGEND VALVE |
|---|
Questions about this item
How can I confirm the 302-205NL tee is flowing correctly after installation?
Check for steady water flow through the 1-inch and 3/4-inch connections with no leaks at the cast brass joints.
What comes with the 302-205NL monoflow tee and what must I supply?
The tee itself is supplied; you must provide compatible 1-inch and 3/4-inch pipe fittings and thread sealant.
Which Legend Valve tee should I choose for a no-lead brass monoflow application?
The 302-205NL T-570 model is the no-lead cast brass monoflow tee in 1-inch by 3/4-inch size.
More in Manifolds & Valves
Similar items
Same shelf, same checkout — eight coins and a 30-minute rate lock.
