Legend Valve
Legend Valve 201-435 S-602 1" PVC Ball Valve
A 1-inch PVC ball valve for controlling fluid flow in compressed air systems
- 1" PVC ball valve controls flow reliably
- Legend Valve brand identifies the manufacturer
- S-602 series designates this specific model
- 201-435 part number ensures correct ordering
- California Prop 65 warning discloses chemical risk
What the product is
The Legend Valve 201-435 S-602 is a 1" PVC ball valve designed for use with air compressors and vacuum pumps. It suits maintenance technicians and workshop operators who need a reliable shut-off component for compressed-air or vacuum lines. The valve carries a California Proposition 65 notice for chemicals linked to cancer and reproductive harm.
Installation notes
The valve installs by threading the 1" connections into the existing pipework; no special tools beyond standard wrenches are required. The most common issue is over-tightening the PVC body, which can crack the material and cause leaks. Ensure threads are clean and use compatible sealant to avoid damaging the housing during assembly.
Deciding specification
The 1" nominal bore determines whether this valve matches the pipe diameter in your system. If your airline or vacuum line uses a different size, this part will not fit without adapters. Buyers needing a larger or smaller through-hole must select a different valve.
Highlights
- 1" PVC ball valve controls flow reliably
- Legend Valve brand identifies the manufacturer
- S-602 series designates this specific model
- 201-435 part number ensures correct ordering
- California Prop 65 warning discloses chemical risk
Specifications
| Brand | LEGEND VALVE |
|---|
Questions about this item
How can I confirm the 1" S-602 PVC ball valve is operating correctly after installation?
Pressurise the line and cycle the handle through a full quarter turn; the valve should move smoothly from fully open to fully closed with no binding or leakage at the body or stem.
What components are included with the 201-435 valve and what must I source separately?
The box contains the Legend Valve 201-435 S-602 1" PVC ball valve only; you will need compatible 1" PVC pipe, solvent cement, primer and any required fittings for your piping layout.
Which Legend Valve model should I select for a one-inch PVC line?
Choose the 201-435 S-602 when you need a 1" PVC ball valve; the model number and size are marked on the body for easy identification.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
