Legend Valve
Legend Valve 201-310 PVC Ball Valve 3 Inch T-601
A 3-inch PVC ball valve for controlling fluid flow in air compressor systems
- 3-inch PVC ball valve controls flow reliably
- T-601 model suits compressed air and vacuum systems
- Legend Valve construction resists corrosion in harsh conditions
- New unit arrives ready for immediate installation
- California Proposition 65 warning included for chemical awareness
Legend Valve 201-310 PVC Ball Valve
This Legend Valve 201-310 is a 3-inch PVC ball valve designed for flow control in air compressor and vacuum pump systems. It suits installers and maintenance teams who need a reliable shut-off component for piping networks. The valve handles general fluid regulation duties where PVC construction is specified. It is not intended for buyers who require metal-bodied valves or different port sizes.
Build quality and connection implications
The valve body uses PVC material identified by the T-601 designation for chemical compatibility in compressed air and vacuum lines. Its socket or threaded ends integrate directly into standard PVC piping without adapters. The quarter-turn handle allows quick manual operation during system checks or emergency isolation. Installers should verify pressure and temperature ratings against their specific system requirements before assembly.
Thermals noise and power considerations
As a passive mechanical valve, the unit draws no electrical power and generates no operational noise. Ambient temperature limits are governed by the PVC material properties rather than active cooling needs. The valve adds no heat load to the surrounding equipment. California Proposition 65 warnings indicate the presence of chemicals linked to cancer and reproductive harm, so appropriate handling precautions apply during installation and service.
Highlights
- 3-inch PVC ball valve controls flow reliably
- T-601 model suits compressed air and vacuum systems
- Legend Valve construction resists corrosion in harsh conditions
- New unit arrives ready for immediate installation
- California Proposition 65 warning included for chemical awareness
Specifications
| Brand | LEGEND VALVE |
|---|
Questions about this item
What pipe size does the 201-310 valve connect to?
It is a 3-inch PVC ball valve with T-601 threading for standard pipe fittings.
What fittings are required to install the 201-310 valve?
Standard 3-inch PVC solvent-weld or threaded fittings matching the T-601 specification.
How is the 201-310 valve installed, and what step is often missed?
Apply primer and cement to both pipe and socket, insert fully with a quarter turn, and hold until set; the missed step is skipping the primer.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
