We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grey PVC butterfly valve with lever handle

Legend Valve

Legend Valve 201-269 8 inch S-650 PVC Butterfly Valve

SKU CH-CJQJ-D1518

An 8-inch PVC wafer butterfly valve with a 7-position lever handle for flow control

  • Eight-inch PVC body fits standard wafer piping
  • Seven-position lever handle gives precise flow control
  • S-650 series rated for reliable shut-off
  • Legend Valve manufacture ensures consistent quality
  • New condition guarantees full service life

8 inch S-650 PVC Butterfly Valve

The Legend Valve 201-269 is an 8 inch wafer-style butterfly valve built from PVC for corrosion-resistant flow control. It suits industrial, commercial and agricultural piping systems that handle water, chemicals or slurries. The seven-position lever handle lets operators throttle or isolate media with positive detents. It is not for buyers who need actuated or automated operation.

Wafer fit between flanges

The wafer body slides between two companion flanges and is secured by the surrounding bolt circle, so no separate valve flanges are required. This arrangement saves space and weight in crowded pipe runs and reduces the number of gasket joints to maintain. The lever handle stays accessible above the line for manual operation. It does not suit installations that demand a lug body for dead-end service.

8 inch nominal bore

The 8 inch bore provides high capacity with low pressure drop when fully open, handling typical water and chemical flows in S-650 class systems. The seven detent positions give repeatable intermediate settings for balancing circuits. PVC construction limits use to temperatures and pressures within the material’s published range. It is not for services that exceed those thermal or chemical limits.

Highlights

  • Eight-inch PVC body fits standard wafer piping
  • Seven-position lever handle gives precise flow control
  • S-650 series rated for reliable shut-off
  • Legend Valve manufacture ensures consistent quality
  • New condition guarantees full service life

Specifications

BrandLEGEND VALVE

Questions about this item

How does the 650 pressure rating affect the valve's limit during sustained high-flow operation?

The S-650 designation indicates a pressure rating that defines the maximum sustained operating limit before material stress becomes a concern.

Does the PVC body and lever handle generate noticeable heat or noise during all-day continuous flow?

PVC construction and the manual lever handle produce no operational noise or heat, as there are no powered or moving internal components during flow.

What pipe flange standard must my existing 8-inch piping match for this wafer valve to seal correctly?

The wafer body requires mating flanges that match the 8-inch nominal size and bolt pattern for proper alignment and sealing.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.