Legend Valve
Legend Valve 114-713NLB 1/2 SWT x 3/8 OD T596 NL Chrome Stop
A 1/2 inch sweat by 3/8 inch OD chrome stop valve with no-lead construction for plumbing supply lines
- 1/2 inch sweat inlet fits copper piping directly
- 3/8 inch OD outlet suits compression connections
- T596 no-lead brass meets low-lead plumbing codes
- Chrome finish resists corrosion on exposed stops
- New valve ready for immediate installation
Quarter-Turn Chrome Stop Valve
The Legend Valve 114-713NLB is a quarter-turn stop valve with a chrome finish. It is designed for residential or light commercial plumbing systems where a durable shut-off point is required. The valve connects a 1/2 inch sweat copper inlet to a 3/8 inch compression outlet.
1/2 Sweat Inlet by 3/8 OD Compression Outlet
The single specification that determines fit is the 1/2 inch solder connection on the inlet side paired with a 3/8 inch outside-diameter compression outlet. This combination matches standard supply lines to fixtures such as toilets or faucets. Verify both pipe sizes before purchase.
Sweat Installation Requires Torch Skill
Installation requires sweating the inlet onto copper pipe using a torch, flux and lead-free solder. The compression outlet is tightened with a wrench onto the supply tube. Common issues include overheating the valve body, damaging the internal seat, or under-tightening the compression nut causing a leak.
Highlights
- 1/2 inch sweat inlet fits copper piping directly
- 3/8 inch OD outlet suits compression connections
- T596 no-lead brass meets low-lead plumbing codes
- Chrome finish resists corrosion on exposed stops
- New valve ready for immediate installation
Specifications
| Brand | LEGEND VALVE |
|---|
Questions about this item
How does the 114-713NLB model number identify this valve in a plumbing system?
The model number 114-713NLB specifies this exact Legend Valve configuration for ordering and compatibility with 1/2 inch solder and 3/8 inch OD connections.
What does the T596 designation indicate about the valve's connection standard?
T596 identifies the valve series and its 1/2 inch solder by 3/8 inch OD compression connection standard for copper piping.
What pipe sizes and tools are needed to install the 1/2 SWT x 3/8 OD connections?
Installing the 1/2 inch solder inlet requires copper pipe, flux, solder and a torch, while the 3/8 inch OD outlet uses a compression nut and ferrule with an adjustable wrench.
More in Manifolds & Valves
Similar items
Same shelf, same checkout — eight coins and a 30-minute rate lock.
