Legend Valve
Legend Valve 113-206 1-1/4" T-720 Carbon Steel Ball Valve
A 1-1/4" T-720 conventional port carbon steel ball valve for controlling flow in air compressor and vacuum pump systems
- 1-1/4" conventional port fits standard piping
- Carbon steel body resists pressure and wear
- T-720 series design for reliable shut-off
- New condition ensures full service life
- Prop 65 notice informs safe handling practices
Industrial flow control
The Legend Valve 113-206 is a 1-1/4" T-720 conventional port carbon steel ball valve built for air compressor and vacuum pump systems. It provides reliable on/off control for industrial and automotive workshop piping. The carbon steel body suits high-pressure air lines where durability is required. This new component integrates directly into existing supply networks.
Static sealing performance
In normal operation the valve maintains a tight seal with minimal leakage across the ball and stem interfaces. Carbon steel construction resists deformation under typical compressed air pressures. No moving seals contact during idle periods so noise is limited to system airflow. The design avoids continuous power draw because actuation is manual rather than electric.
Sustained pressure handling
Under prolonged pressurised use the valve body and ball retain dimensional stability without creep. Repeated cycling does not degrade the conventional port geometry or sealing surfaces. The carbon steel material resists fatigue from constant pressure spikes in compressor duty cycles. California Proposition 65 warnings apply for chemicals known to cause cancer and reproductive harm.
Highlights
- 1-1/4" conventional port fits standard piping
- Carbon steel body resists pressure and wear
- T-720 series design for reliable shut-off
- New condition ensures full service life
- Prop 65 notice informs safe handling practices
Specifications
| Brand | LEGEND VALVE |
|---|
Questions about this item
How do I install the 1-1/4" T-720 carbon steel ball valve and what step is often missed?
Thread the valve onto 1-1/4" pipe using suitable sealant, then tighten with a wrench on the valve body flats — not the handle — to avoid distorting the ball seal.
What maintenance or replacement will the T-720 carbon steel ball valve need over time?
Inspect the packing nut annually; tighten or repack if leakage appears around the stem, and replace the valve if the ball or seats show wear that prevents shut-off.
What limit appears first on the T-720 carbon steel ball valve during sustained high-cycle use?
Repeated cycling wears the stem packing first, causing external leakage before the ball or seats degrade, so monitor the packing area during heavy-duty operation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
