Legend Valve
Legend Valve 113-165 1" T-717 Stainless Steel Ball Valve
A 1-inch three-piece full-port ball valve made from 316 stainless steel with a locking handle
- Full-port design ensures unrestricted flow
- 316 stainless steel body resists corrosion
- Locking handle prevents accidental operation
- Three-piece construction simplifies maintenance
- California Proposition 65 chemical warning applies
Application fit
The Legend Valve 113-165 is a 1 inch T-717 three-piece full-port ball valve built from 316 stainless steel. It suits installers and maintenance teams who need a corrosion-resistant shut-off for air compressors and vacuum pumps. The locking handle adds security against accidental operation. Buyers who require a different port size, a two-piece body or a non-locking lever should look elsewhere.
Thermals noise and power
As a purely mechanical component the valve generates no heat, consumes no electricity and produces no audible noise during normal operation. Flow restriction is minimised by the full-port design so pressure drop across the valve remains negligible. There are no electrical ratings or thermal limits to consider for this product.
Sustained load behaviour
The 316 stainless steel body and trim resist chemical attack and wear during continuous cycling in compressed-air or vacuum service. The three-piece construction allows inline maintenance without removing the valve from the pipeline. California Proposition 65 notices indicate the presence of chemicals known to cause cancer and reproductive harm, so appropriate handling procedures should be followed during extended use.
Highlights
- Full-port design ensures unrestricted flow
- 316 stainless steel body resists corrosion
- Locking handle prevents accidental operation
- Three-piece construction simplifies maintenance
- California Proposition 65 chemical warning applies
Specifications
| Brand | LEGEND VALVE |
|---|
Questions about this item
How do I install the 1" T-717 valve and what step is often missed?
Install the valve in the pipeline using the 1" connections; the step often missed is tightening the three-piece body bolts evenly to prevent leaks.
What maintenance will the 316 stainless steel ball valve need later?
Periodically operate the locking handle to prevent seizing and inspect the seals for wear; replace seats if leakage appears.
What limit appears first on the T-717 under sustained use?
The locking handle mechanism may stiffen before the 316 stainless steel body shows fatigue under continuous cycling.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
