Legend Valve
Legend Valve 113-144 3/4" T-712 316 Stainless Steel Ball Valve
3/4-inch full-port ball valve in 316 stainless steel with a locking handle
- 3/4" full port maximises flow capacity
- 316 stainless steel body resists corrosion
- Locking handle secures valve position
- Model 113-144 ensures exact replacement fit
- T-712 series built for compressed-air systems
Purpose and fit
The Legend Valve 113-144 is a 3/4 inch T-712 full-port ball valve made from 316 stainless steel with a locking handle. It is suited for installers and maintenance crews who need a corrosion-resistant shut-off in compressed-air or vacuum lines. The valve is not intended for buyers who require a different pipe diameter or a non-locking handle.
Thermals noise and power
This component has no moving electrical parts, so it generates no heat, produces no audible noise and draws no power during normal operation. Performance depends entirely on the pressure and flow characteristics of the surrounding air-compressor or vacuum-pump system.
Deciding specification
The critical detail is the 316 stainless-steel body combined with a 3/4 inch full-port design and locking handle, which together determine chemical compatibility and secure shut-off for the intended line size.
Highlights
- 3/4" full port maximises flow capacity
- 316 stainless steel body resists corrosion
- Locking handle secures valve position
- Model 113-144 ensures exact replacement fit
- T-712 series built for compressed-air systems
Specifications
| Brand | LEGEND VALVE |
|---|
Questions about this item
How do I install the 3/4" T-712 valve and what step is often missed?
Thread the 3/4" T-712 onto clean NPT threads using PTFE tape or pipe sealant, then tighten with a wrench on the hex flats. The step often missed is aligning the full-port ball so flow direction matches the handle position before final torque.
What maintenance or replacement will the 316 stainless steel ball valve need later?
The 316 stainless steel body resists corrosion, but the PTFE seats and stem packing can wear after many cycles. Plan to replace the seat and packing kit if the handle becomes stiff or a slow leak appears at the stem.
What limit appears first on the 113-144 valve under sustained use?
The 316 stainless steel ball and body handle high pressure and temperature, but the PTFE seat material reaches its temperature limit before the metal components, so sustained high-temperature service will degrade the seats first.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
