We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bronze gate valve with bronze handwheel, 3 inch size

Legend Valve

Legend Valve 104-610 3 inch S-415 Bronze Gate Valve

SKU CH-BW2R-TSWCC

A 3-inch bronze gate valve with inserted bonnet for plumbing flow control

  • Bronze construction resists corrosion for long service life
  • 3-inch S-415 gate valve controls flow in plumbing systems
  • Inserted bonnet design maintains seal integrity under pressure
  • New condition ensures full factory performance from installation
  • Model 104-610 identifies the exact specification for ordering

3 inch Bronze Gate Valve

The Legend Valve 104-610 is a 3 inch S-415 bronze gate valve with an inserted bonnet design. It serves as a shut-off fitting for plumbing systems where a full-bore bronze valve is required. The unit is supplied new and carries California Proposition 65 warnings for chemicals linked to cancer and reproductive harm.

Suits shut-off duty not flow control

This valve suits installers needing a bronze gate valve for on-off service in compatible piping. It is not for buyers who need a throttling or regulating valve, nor for systems that require a different connection size or pressure class than the S-415 rating provides.

Inserted bonnet bronze construction

The single specification that decides fit is the inserted bonnet bronze construction with S-415 rating. Confirm the pipeline matches the 3 inch nominal size and the S-415 class before purchase.

Highlights

  • Bronze construction resists corrosion for long service life
  • 3-inch S-415 gate valve controls flow in plumbing systems
  • Inserted bonnet design maintains seal integrity under pressure
  • New condition ensures full factory performance from installation
  • Model 104-610 identifies the exact specification for ordering

Specifications

BrandLEGEND VALVE

Questions about this item

What pipe size and thread type must I already have to install the 104-610 3 inch S-415 bronze gate valve?

You need a 3 inch NPT threaded pipe end; the valve has female NPT threads on both ports so it screws directly onto standard iron or copper pipe with matching threads.

Will the S-415 bronze gate valve seal properly against the older galvanised pipe I plan to keep in the system?

Yes, the bronze body and inserted bonnet are compatible with galvanised steel threads; use PTFE tape or pipe dope on the male threads to ensure a leak-free joint without galvanic corrosion.

How can I verify the 104-610 gate valve is operating correctly after I thread it into the line?

Turn the handwheel fully counter-clockwise until it stops, then pressurise the line; water should flow freely. Close the wheel clockwise until firm resistance is felt — flow must stop completely with no seepage past the wedge.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.