Legend Valve
Legend Valve 102-513 1/2" T-3100 Gas Ball Valve with Side Tap
1/2" forged brass gas ball valve with side tap for secure flow control
- 1/2" T-3100 forged brass gas valve with side tap
- Legend Valve brand 102-513 model for gas service
- New condition ensures factory-original performance
- California Proposition 65 warning for cancer risk
- California Proposition 65 warning for reproductive harm risk
1/2" T-3100 Forged Brass Gas Valve
This 1/2 inch T-3100 forged brass gas ball valve includes a side tap for system access. It is built for gas piping installations where a compact shut-off point with a test or drain port is required. The valve suits residential and light commercial gas lines. California Proposition 65 warnings apply for cancer and reproductive harm.
Replaces basic shut-off valves without test ports
The side tap eliminates the need for a separate tee and plug when a pressure gauge or drain is needed. The upgrade is worth it when local code requires an accessible test point at the appliance or meter. It saves fitting count and reduces potential leak paths in new or retrofit gas work.
Limited to 1/2 inch threaded connections
The valve uses standard 1/2 inch pipe threads and is rated for gas applications only. It is not intended for water, compressed air, or other fluids unless the manufacturer specifies otherwise. Installers must verify pressure and temperature limits against local regulations before use.
Highlights
- 1/2" T-3100 forged brass gas valve with side tap
- Legend Valve brand 102-513 model for gas service
- New condition ensures factory-original performance
- California Proposition 65 warning for cancer risk
- California Proposition 65 warning for reproductive harm risk
Specifications
| Brand | LEGEND VALVE |
|---|
Questions about this item
What pipe size does the 1/2" T-3100 gas ball valve connect to?
The valve has a 1/2 inch connection size for standard gas piping installations.
How do you install the forged brass valve with side tap without damaging the threads?
Apply gas-rated thread sealant on male threads only, tighten with two wrenches to prevent body stress, and orient the side tap for accessibility.
When should the side tap on this Legend Valve model be inspected or replaced?
Check the side tap annually for leaks or corrosion; replace if the plug seizes or the brass shows green patina indicating dezincification.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
