Legend Valve
Legend Valve 102-114 5/8 FLX 3/4 FIP T-3000 Forged Brass Gas Valve
A 5/8-inch flare by 3/4-inch FIP forged brass gas valve rated T-3000 for fuel-line service
- Forged brass body handles 3000 pressure class
- 5/8 flare to 3/4 FIP connects dissimilar threads
- New condition ensures clean, uncontaminated sealing surfaces
- Prop 65 listed chemicals disclosed for regulatory compliance
- Model 102-114 identifies exact replacement specification
Valve for Gas Lines
This 5/8 inch flare by 3/4 inch female NPT valve is built from forged brass for gas service. It carries a T-3000 rating and suits installers who need a reliable shut-off on residential or light-commercial piping.
Thread and Pressure Check
Verify that the existing line uses a 7/8-14 flare on one side and 3/4 inch female pipe thread on the other. Confirm the system pressure stays within the T-3000 limit and that local codes permit forged brass for the intended gas type.
Replaces Older Brass Valves
The unit swaps out worn or lower-rated brass valves on the same connection sizes. The upgrade is worth it when the old valve shows leakage, corrosion or a pressure rating below the T-3000 mark.
Highlights
- Forged brass body handles 3000 pressure class
- 5/8 flare to 3/4 FIP connects dissimilar threads
- New condition ensures clean, uncontaminated sealing surfaces
- Prop 65 listed chemicals disclosed for regulatory compliance
- Model 102-114 identifies exact replacement specification
Specifications
| Brand | LEGEND VALVE |
|---|
Questions about this item
Does the Legend Valve 102-114 ship with any fittings or thread sealant in the box?
The valve is supplied as a single forged brass unit with 5/8" FL and 3/4" FNPT ends; fittings and sealant are not included and must be purchased separately.
Should I choose the T-3000 rating for my gas line or is a lower rating available in this model?
This specific model carries the T-3000 designation only; no alternative pressure class is offered for the 102-114 part number.
What does the T-3000 marking mean when the valve is installed on a residential gas supply?
T-3000 indicates the valve is rated for 3000 psi working pressure, far above typical residential gas pressures, so it provides a wide safety margin in normal service.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
