Legend Valve
Legend Valve 101-624 3/4" T-1007 forged brass ball valve
3/4 inch forged brass full port ball valve with FNPT by sweat connections
- Forged brass construction resists corrosion for long service life
- Full-port design allows unrestricted flow through the valve
- FNPT x sweat connections suit both threaded and copper piping
- T-1007 model rated for reliable shut-off in compressed-air systems
- New condition ensures factory-original performance from first use
Product Identity
The Legend Valve 101-624 is a 3/4" T-1007 forged brass full port ball valve with FNPT x Sweat connections. It serves plumbers and HVAC technicians who need a reliable shut-off valve for water or air lines in residential and light commercial installations.
Build and Connections
Forged brass construction provides strength and corrosion resistance for long service life. The female NPT threaded end joins standard pipe fittings while the sweat end accepts copper tubing for a permanent soldered joint, giving installers flexibility when connecting dissimilar pipe types.
Application Limits
The full port design maintains unrestricted flow when the valve is open, reducing pressure drop across the fitting. California Proposition 65 warnings indicate the product contains chemicals known to cause cancer and reproductive harm, so appropriate handling and installation practices should be followed.
Highlights
- Forged brass construction resists corrosion for long service life
- Full-port design allows unrestricted flow through the valve
- FNPT x sweat connections suit both threaded and copper piping
- T-1007 model rated for reliable shut-off in compressed-air systems
- New condition ensures factory-original performance from first use
Specifications
| Brand | LEGEND VALVE |
|---|
Questions about this item
How does the FNPT x Sweat interface affect flow capacity?
The FNPT x Sweat ends on this forged brass full-port valve let you connect threaded pipe on one side and sweat copper on the other without reducing the bore through the ball.
What clearance is required to install the T-1007 valve body?
The 3/4-inch forged brass body needs enough space for a handle turn; allow clearance around the valve body for the lever to move freely.
What is the correct sequence for the sweat connection on this valve?
Disassemble the valve, solder the sweat end to the copper pipe first, then reassemble the ball and seats once the joint has cooled to avoid damaging the PTFE seats.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
