Legend Valve
Legend Valve 101-603NL 1/2 inch S-1102 no lead ball valve
1/2-inch no-lead forged brass full-port ball valve with drain for potable water systems
- Lead-free forged brass protects water quality
- Full-port design maintains maximum flow capacity
- Integrated drain enables easy system maintenance
- 1/2 inch connection fits standard plumbing lines
- California Prop 65 compliance disclosed for safety awareness
Lead-Free Brass Ball Valve
The Legend Valve 101-603NL is a 1/2 inch no-lead forged brass full-port ball valve with an integrated drain. It is designed for plumbing and compressed-air systems where lead-free materials are required by code. The S-1102 configuration provides a standard quarter-turn shut-off with a drain port for system maintenance.
Installers Meeting No-Lead Requirements
This valve suits plumbers and facility technicians who must comply with no-lead regulations for potable water or compressed air lines. It is not intended for applications that demand a different port size, a non-drain body style, or a material other than forged brass. Buyers needing a larger diameter or a specialised pressure rating should look at alternative models.
Fits 1/2 Inch Threaded Piping
The valve threads directly into 1/2 inch NPT pipework and requires no special tools beyond standard wrenches. Its full-port design maintains unrestricted flow through the line while the built-in drain allows convenient bleeding or winterising without extra fittings. The forged brass body withstands typical residential and light commercial pressures.
Highlights
- Lead-free forged brass protects water quality
- Full-port design maintains maximum flow capacity
- Integrated drain enables easy system maintenance
- 1/2 inch connection fits standard plumbing lines
- California Prop 65 compliance disclosed for safety awareness
Specifications
| Brand | LEGEND VALVE |
|---|
Questions about this item
What pipe size and thread type does the 1/2" S-1102 valve require for installation?
The valve uses a 1/2 inch connection; matching NPT-threaded pipe or fittings in the same size are needed for a leak-free joint.
Can the 101-603NL valve be used on older copper or steel lines that previously had a standard brass ball valve?
Yes, the no-lead forged brass body threads onto existing 1/2 inch NPT pipe, so it fits legacy copper or steel lines without adapters.
How can I verify the drain port on the S-1102 is functioning after installation?
Open the valve handle fully, then crack the drain cap; water or air should flow freely, confirming the full-port bore and drain are clear.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
