Legend Valve
Legend Valve 101-515 1" S-1100 forged brass full port ball valve with drain
A 1" forged brass full-port ball valve with a drain port for line isolation and condensate removal
- Forged brass body resists corrosion and high pressure
- Full-port design allows unrestricted flow through the valve
- Integrated drain enables easy system bleeding and maintenance
- 1-inch connection fits standard piping without adapters
- New condition ensures reliable performance from first use
Product identity
Legend Valve 101-515 is a 1" S-1100 forged brass full port ball valve with drain. It is a new plumbing component built for fluid control in compressed air and vacuum systems. The full port design maintains unrestricted flow through the valve body.
Suitability
This valve suits installers who need a durable brass ball valve with an integrated drain for maintenance on 1 inch piping. Buyers who require a different connection size, a valve without a drain port, or a body material other than forged brass should look at other options.
Deciding specification
The 1 inch nominal size and S-1100 series designation determine whether this valve matches the piping and pressure requirements of the installation. Verify both values against the system specifications before purchasing.
Highlights
- Forged brass body resists corrosion and high pressure
- Full-port design allows unrestricted flow through the valve
- Integrated drain enables easy system bleeding and maintenance
- 1-inch connection fits standard piping without adapters
- New condition ensures reliable performance from first use
Specifications
| Brand | LEGEND VALVE |
|---|
Questions about this item
How do I install the 1" S-1100 forged brass full port ball valve and what step is often missed?
Thread the valve onto the 1-inch pipe using sealant rated for brass, then tighten with a wrench on the hex flats; the step often missed is opening the drain port afterward to verify flow and bleed trapped air.
What maintenance or replacement will the 101-515 valve need over time?
Inspect the PTFE seats and stem packing annually; replace the seat kit if seepage appears at the ball or the handle torque rises, and swap the drain cap gasket whenever the cap is removed.
What limit appears first on the 1" full port ball valve under sustained high-cycle use?
The stem packing typically weeps first after extended cycling, signalling that the packing nut needs retorquing or the packing set needs replacement before body or ball wear becomes an issue.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
