Legend Valve
Legend Valve 101-434NL 3/4 T2002NL Drainable Comp FPB Vacuum Pump
A 3/4-inch no-lead DZR forged brass ball valve with compression ends and a drainable feature for air compressor or vacuum pump systems
- No-lead brass protects drinking water safety
- DZR forged brass resists dezincification corrosion
- Compression ends enable solder-free installation
- Drainable port allows easy system maintenance
- California Prop 65 warning discloses chemical hazards
Lead-Free Brass Ball Valve
The Legend Valve 101-434NL is a 3/4 inch T2002NL drainable compression ball valve made from no-lead DZR forged brass. It suits plumbing installers and maintenance crews needing a compliant shut-off for potable water lines. The drainable feature allows easy system winterising or servicing without removing the valve body. Buyers needing a non-compression connection type or a larger bore should look elsewhere.
California Proposition 65 Compliance
This product carries California Proposition 65 warnings for chemicals known to cause cancer and reproductive harm. The no-lead DZR forged brass construction meets current low-lead mandates for drinking water installations. Normal operation does not generate heat, noise or electrical power draw because the valve is a purely mechanical component. Installers should follow local codes for handling and disposal of brass fittings.
Compression Ends and Drain Port
The valve uses compression ends on both sides for direct copper tube connection without soldering. A built-in drain port lets users bleed the line or attach a hose for seasonal draining. Forged brass body resists dezincification and corrosion in aggressive water conditions. The quarter-turn handle provides clear on/off indication and reliable sealing over repeated cycles.
Highlights
- No-lead brass protects drinking water safety
- DZR forged brass resists dezincification corrosion
- Compression ends enable solder-free installation
- Drainable port allows easy system maintenance
- California Prop 65 warning discloses chemical hazards
Specifications
| Brand | LEGEND VALVE |
|---|
Questions about this item
How is the Legend Valve 101-434NL installed and what step is often missed?
The valve uses compression ends; tighten each nut to the manufacturer's torque specification and verify the drainable port faces downward so water can exit.
What maintenance or replacement will the 101-434NL need over time?
Inspect the DZR forged brass body and no-lead ball for scale or corrosion annually; replace the valve if the drain port clogs or the handle seizes.
What limit appears first during sustained operation of the 101-434NL?
Mineral build-up in the drainable cavity can restrict flow before the forged brass body shows wear, especially in hard-water systems.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
