Legend Valve
Legend Valve 101-227 1-1/2" T-901 Bronze Full Port Ball Valve
A 1-1/2 inch T-901 bronze full-port ball valve for controlling flow in air compressor and vacuum pump systems
- Full-port bronze body allows unrestricted flow
- 1-1/2 inch T-901 model fits standard piping
- Legend Valve brand ensures reliable construction
- Bronze material resists corrosion in air systems
- California Proposition 65 warning indicates chemical presence
1-1/2" Bronze Full Port Ball Valve
The Legend Valve 101-227 is a T-901 series bronze ball valve designed for fluid control in compressed air systems. Its full port construction allows unrestricted flow through the 1-1/2 inch connection, making it suitable for supply lines on air compressors and vacuum pumps where pressure drop must be minimised.
Bronze body with full port flow path
The bronze body provides corrosion resistance for typical shop air and water applications while the full port bore matches the pipe inner diameter to eliminate turbulence. Standard NPT threading on both ends enables direct installation into existing pipework without adapters, and the quarter-turn handle gives immediate visual confirmation of open or closed state during daily operation.
Replaces restricted port shut-off valves
Swapping a standard port valve for this full port model restores full system capacity when the original fitting has become a bottleneck. The upgrade is worth it when pressure gauges show excessive drop across the valve during peak demand, or when a failed seal on the old unit requires replacement with a more durable bronze alternative.
Highlights
- Full-port bronze body allows unrestricted flow
- 1-1/2 inch T-901 model fits standard piping
- Legend Valve brand ensures reliable construction
- Bronze material resists corrosion in air systems
- California Proposition 65 warning indicates chemical presence
Specifications
| Brand | LEGEND VALVE |
|---|
Questions about this item
What pipe thread standard does the 1-1/2" T-901 valve use and what pressure does it cap?
The T-901 uses NPT threads and its bronze body handles standard water, oil and gas pressures up to the valve's rated working limit.
What clearance and flange pattern does the 1-1/2" T-901 need to mount in-line?
The full-port bronze body requires straight pipe runs with NPT threads on both ends and enough space for the 90-degree handle sweep.
How is the Legend Valve 101-227 installed and which step do installers often miss?
Apply thread sealant to the male NPT ends, tighten with wrenches on the valve flats, then cycle the handle fully open and closed to verify seat engagement.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
