Legend Valve
Legend Valve 101-066 1-1/4" T-1002 Forged Brass Full Port Ball Valve
A 1-1/4" T-1002 forged brass full-port ball valve with gland follower design for air compressor and vacuum pump systems
- Full-port design maintains maximum flow capacity
- Forged brass body resists corrosion and high pressure
- Gland follower stem seal prevents leakage under vibration
- 1-1/4 inch NPT threads fit standard piping systems
- T-1002 series built for compressed air and vacuum service
Application and Suitability
The Legend Valve 101-066 is a 1-1/4" T-1002 forged brass full port ball valve designed for air compressor and vacuum pump installations. It suits technicians and facility managers who need a durable shut-off component for compressed air systems. The gland follower design supports reliable stem sealing in industrial environments. Buyers requiring integrated actuation or electronic flow monitoring will need a different valve type.
Capacity and Headroom
The full port bore provides unrestricted flow matching the 1-1/4" pipe size, minimising pressure drop across the valve when fully open. Forged brass construction withstands typical shop air pressures and resists corrosion from moisture in compressed air lines. The valve handles standard compressor cycling without seat deformation. Systems demanding higher pressure ratings or exotic fluid compatibility exceed the design intent of this model.
Material and Compliance Limits
Forged brass offers good mechanical strength but is not suitable for highly acidic, alkaline or ammonia-rich media that attack copper alloys. The product carries California Proposition 65 warnings for chemicals known to cause cancer and reproductive harm, so installers must follow local handling and ventilation regulations. It is intended for air and vacuum service; use with steam, fuel or potable water is not supported by the supplied data.
Highlights
- Full-port design maintains maximum flow capacity
- Forged brass body resists corrosion and high pressure
- Gland follower stem seal prevents leakage under vibration
- 1-1/4 inch NPT threads fit standard piping systems
- T-1002 series built for compressed air and vacuum service
Specifications
| Brand | LEGEND VALVE |
|---|
Questions about this item
Will the 1-1/4" T-1002 forged brass full port ball valve connect to my existing 1-1/4" threaded pipework?
Yes, the valve has 1-1/4" connections that match standard NPT threading, so it threads directly onto your existing 1-1/4" pipe without adapters.
How can I verify the gland follower design is sealing properly after installation?
Pressurise the line and check the stem area; the gland follower lets you tighten the packing nut to stop any weep without removing the valve.
Does the box include pipe sealant or do I need to buy thread tape separately?
The valve ships alone; you must supply PTFE tape or pipe dope for the threaded joints.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
