We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White industrial washdown motor with cooling fins and shaft visible

Leeson

Leeson 191570.00 Washdown Motor 2 hp 1750 RPM 208-230/460V AC 145TC Frame

SKU CH-M4V8-Y1GXR

Three-phase washdown motor delivers 2 hp at 1750 RPM in a 145TC frame for 208-230/460V AC supply

  • 2 hp output drives demanding washdown equipment
  • 1750 RPM at 60 Hz matches standard industrial speed
  • Dual 208-230/460 V AC input fits common plant power
  • 145TC frame ensures direct NEMA mounting compatibility
  • Totally enclosed fan-cooled design resists moisture and contaminants

Leeson 191570.00 Washdown Motor

This Leeson washdown motor is a three-phase AC unit rated at 2 hp and 1750 RPM. It suits food-processing, pharmaceutical or packaging lines that demand regular high-pressure cleaning. The 145TC frame fits standard C-face mounting patterns used on pumps, gearboxes and conveyors.

Replaces lower-service-factor or open-frame units

Operations running older open drip-proof motors that fail under washdown cycles gain IP-rated protection and a 1.15 service factor. The step up is worth it when chemical sanitising, humidity or coolant spray cause winding contamination or bearing failure on lesser enclosures.

Sustained load on continuous duty cycle

The totally enclosed fan-cooled design runs continuous duty at 40 °C ambient without thermal protection tripping. Insulation class F handles the temperature rise while the motor delivers full-load current of 5.8 to 5.4 amps at 208-230 V or 2.7 amps at 460 V across both 60 Hz and 50 Hz supplies.

Highlights

  • 2 hp output drives demanding washdown equipment
  • 1750 RPM at 60 Hz matches standard industrial speed
  • Dual 208-230/460 V AC input fits common plant power
  • 145TC frame ensures direct NEMA mounting compatibility
  • Totally enclosed fan-cooled design resists moisture and contaminants

Specifications

BrandLEESON

Questions about this item

What are the shaft and mounting dimensions for the 145TC frame on this motor?

The 145TC frame provides a standard NEMA shaft diameter and keyway with a C-face bolt circle for direct coupling to gearboxes or pumps.

How do I wire the dual-voltage 208-230/460V terminals for my supply voltage?

Configure the nine leads in parallel for 208-230V operation or in series for 460V; the motor is not usable at 200V.

When should I plan to replace the bearings on this totally enclosed fan-cooled unit?

With continuous duty at a 40°C maximum ambient temperature and Class F insulation, bearing life depends on load and alignment; monitor vibration and temperature for signs of wear.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.