We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Leeson 119462.00 three-phase washdown motor, 56J frame, grey enclosure

Leeson

Leeson 119462.00 3 HP 56J Frame 230/460V Washdown Motor

SKU CH-6NV5-W0HET

Three-phase washdown jet pump motor rated 3 hp at 3,490 rpm, 56J frame, 230/460 V with 1.15 service factor and continuous duty

  • 3 HP output drives demanding pump applications
  • Totally enclosed fan-cooled design resists washdown environments
  • Dual-voltage 230/460 V suits common industrial supplies
  • 15 service factor handles peak loads reliably
  • 56J frame fits standard jet pump mounts

Three-phase washdown motor for jet pumps

The Leeson 119462.00 is a three-phase washdown motor rated at 3 hp and built in a 56J frame. It suits industrial and agricultural jet-pump installations that need a totally enclosed fan-cooled enclosure and continuous-duty operation.

Thermals noise and power draw in normal use

At 230/460 V AC the motor draws 8.0 or 4.0 full-load amps with a 1.15 service factor. Class F insulation and a 40 °C maximum ambient temperature support steady running, while the TEFC design handles heat without external cooling. It operates on 60/50 Hz supply and is usable at 208 V.

Behaviour under sustained load

Continuous duty cycle and NEMA Design B torque profile let the motor maintain 3,490 RPM under prolonged demand. No thermal protection is fitted, so external overload devices are required. The shaft rotates CW or CCW, the base is not removable, and the unit is not usable at 200 V.

Highlights

  • 3 HP output drives demanding pump applications
  • Totally enclosed fan-cooled design resists washdown environments
  • Dual-voltage 230/460 V suits common industrial supplies
  • 15 service factor handles peak loads reliably
  • 56J frame fits standard jet pump mounts

Specifications

BrandLEESON

Questions about this item

How do I wire the 119462.00 motor for 230 V operation and what step is commonly missed?

Connect the nine leads for low voltage per the diagram on the nameplate and verify the supply is 208 – 230 V; the step often missed is confirming the service factor 1.15 matches the pump load.

Which parts of the 119462.00 will need replacement after extended washdown duty?

The bearings and shaft seal are the wear items; the Class F insulation and totally enclosed fan cooled enclosure are rated for continuous duty at 40 °C ambient.

What thermal limit appears first when the 119462.00 runs continuously at full load?

The winding temperature reaches the Class F limit before the 1.15 service factor can be used, so the motor must not exceed 40 °C ambient.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.