We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Leeson 108053.00 DC motor 56C frame totally enclosed fan-cooled silver finish

Leeson

Leeson 108053.00 DC Permanent Magnet Motor 56C 24V 1HP 800RPM 35 in-lb 39.0A 40C

SKU CH-SW1W-TCHFS

24 V DC permanent-magnet motor delivers 1 HP at 800 RPM with 35 in-lb torque in a 56C frame rated for 40 °C ambient

  • ColorTransparent
  • 1 HP continuous duty at 800 RPM
  • 24 V DC input with 39.0 A full-load current
  • 35 in-lb torque from permanent magnet design
  • 56C face mounting with removable base
  • Totally enclosed fan-cooled for 40 °C ambient

Product identity

The Leeson 108053.00 is a 1 HP DC permanent magnet motor built for continuous duty at 24 V. It suits equipment builders and maintenance teams who need a compact, totally enclosed drive for conveyors, pumps or HVAC machinery.

Build and mounting

A 56C face and base arrangement with a removable base gives flexibility for direct coupling or belt drive layouts. The 5/8 in shaft with ball bearings and 1 7/8 in shaft length supports standard couplings, while the totally enclosed fan-cooled enclosure protects internals from dust and moisture.

Thermals and power

Class H insulation and a 40 °C maximum ambient rating allow sustained operation without thermal protection. At full load the motor draws 39.0 A and delivers 35 in-lb of torque at 800 RPM, so wiring and supply capacity must match that continuous current demand.

Highlights

  • 1 HP continuous duty at 800 RPM
  • 24 V DC input with 39.0 A full-load current
  • 35 in-lb torque from permanent magnet design
  • 56C face mounting with removable base
  • Totally enclosed fan-cooled for 40 °C ambient

Specifications

BrandLEESON
ColorTransparent

Questions about this item

What does the 24 V DC input mean for speed control?

The motor runs on 24 V DC; varying the voltage changes speed, but torque stays near 35 in-lb up to the 800 RPM nameplate limit.

Will the 56C face and 5/8 in shaft bolt to my existing gearbox?

The 56C frame provides a standard NEMA face mount with a 5/8 in diameter shaft 1 7/8 in long, matching common 56C gearboxes and couplings.

How do I wire the motor for reversible rotation without damaging the brushes?

Connect the two armature leads to a 24 V DC source; swap the leads to reverse direction — CW/CCW is supported, but ensure the supply can deliver 39.0 A at start-up.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.