LANDTEK
LANDTEK CM-1210A Coating Thickness Gauge F/NF 0-2000um electrician tool
Measures coating thickness on magnetic and non-magnetic metals up to 2000 µm with F/NF probes, continuous mode for curved surfaces, and USB, RS-232 or Bluetooth data output
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- Measures coatings up to 2000 µm with dual magnetic induction and eddy current probes
- Switch between single and continuous modes for flat or curved surfaces
- Stores calibration values automatically and identifies substrate material without manual input
- Outputs data via USB, RS-232 or Bluetooth for PC analysis
- Powers down automatically to extend battery life during field use
Coating gauge for magnetic
The LANDTEK CM-1210A measures coating thickness on both ferrous and non-ferrous metals using magnetic induction and eddy current methods. It suits electricians and inspectors who need to verify paint, galvanising or anodising layers on steel, aluminium or copper surfaces. The dual-probe design covers both substrate types in a single instrument.
Measurement range capped at 2000 micrometres
Readings span 0 to 2000 micrometres. Single mode suits spot checks while continuous mode helps track thickness on curved or small parts. The gauge stores calibration values automatically and recognises the substrate without manual selection. Data leaves the device through USB or RS-232, and a Bluetooth option is available for wireless transfer.
Verify probe compatibility
Confirm that the F and N probes supplied match the coating and substrate materials you test. Ensure your PC or logger has a free USB or RS-232 port, or that the Bluetooth option is fitted if you need wireless output. The instrument ships in a red box as a single pack with a three-year parts and one-year labour warranty.
Highlights
- Measures coatings up to 2000 µm with dual magnetic induction and eddy current probes
- Switch between single and continuous modes for flat or curved surfaces
- Stores calibration values automatically and identifies substrate material without manual input
- Outputs data via USB, RS-232 or Bluetooth for PC analysis
- Powers down automatically to extend battery life during field use
Specifications
| Brand | ETCR |
|---|---|
| Model | CM-1210A |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
Should I use the F probe or the N probe for my coating job?
Use the F probe for non-magnetic coatings on magnetic substrates like steel, and the N probe for non-conductive coatings on non-magnetic metals such as aluminium.
What does the 2000um range mean when I am measuring on site?
You can read coating thicknesses from zero up to 2000 micrometres in a single pass, covering most paint, galvanising and powder-coat layers.
How do I get readings from the gauge into my PC for reports?
Connect the USB or RS-232 port, or pair the optional Bluetooth module, then transfer stored values directly to your computer.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
