We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White fiberglass omnidirectional antenna, 65 in tall, N-Female connector base

Laird Techologies

Laird Techologies FG9026 902-928 MHz Fiberglass Omnidirectional Antenna

SKU CH-EFMM-G6M86

A 902-928 MHz fiberglass omnidirectional antenna with 8.15 dBi gain, 100 W power handling and N-Female connector

  • 15 dBi gain extends horizontal coverage
  • 902-928 MHz band matches ISM and LoRa networks
  • Fiberglass radome with UV coating survives 125 mile/h winds
  • DC-ground lightning protection safeguards connected equipment
  • 65 in collinear array focuses energy in the horizontal plane

902-928 MHz Fiberglass Antenna

The Laird Technologies FG9026 is a new fiberglass omnidirectional antenna designed for base station use across the 902 to 928 MHz band. It provides 8.15 dBi gain with vertical polarization for fixed wireless installations.

Collinear Design and Mounting

A collinear element array is enclosed in high density fiberglass with an ultraviolet inhibiting coating for extreme condition durability. The mounting sleeve is tuned to eliminate RF currents on the feed line, creating a cold sleeve that allows flexible mounting options. Hardware is ordered separately and the N Female connector is located at the bottom of the 65 inch radome.

100 W Power and 1.5:1 VSWR

Maximum input power is rated at 100 W with lightning protection via a DC ground. The maximum VSWR is 1.5:1 across the specified frequency range. The antenna is rated for wind velocities up to 125 mile/h with zero degrees of fixed electrical downtilt.

Highlights

  • 15 dBi gain extends horizontal coverage
  • 902-928 MHz band matches ISM and LoRa networks
  • Fiberglass radome with UV coating survives 125 mile/h winds
  • DC-ground lightning protection safeguards connected equipment
  • 65 in collinear array focuses energy in the horizontal plane

Specifications

BrandLaird Technologies

Questions about this item

What is the maximum VSWR of the FG9026 antenna and what does it cap in practice?

The maximum VSWR is 1.5:1, which caps reflected power to about four percent of forward power across the 902-928 MHz band.

What physical mounting hardware does the FG9026 require and what are the key dimensions?

The antenna is 65 inches long, weighs 6 lb, and has a bottom N-Female connector; mounting hardware must be ordered separately and the mounting sleeve is tuned for a cold RF surface.

How is the FG9026 installed and which step is most often missed?

Install by securing the fiberglass radome to a mast using separately ordered hardware, then connect the feedline to the bottom N-Female connector; the step most often missed is ordering the correct mounting kit before starting.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.