We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Box of one hundred silver screw anchors with fluted bodies and pointed tips

L.H. DOTTIE

L.H. DOTTIE WD8 Screw Anchor 1-1/2" Zamac Alloy 100 PK

SKU CH-MKSZ-RSYTQ

Pack of 100 Zamac alloy screw anchors, 1-1/2 inches long, for secure mounting in masonry and concrete

  • TypeAnchors
  • Zamac alloy construction resists corrosion in fireplace heat
  • 100 anchors per pack covers large installation projects
  • 1-1/2 inch length suits standard masonry mounting depths
  • Screw anchor design expands for secure hold in brick or stone
  • New condition ensures full structural integrity out of the box

DOTTIE WD8 Screw Anchor 100 Pack

This pack contains one hundred zamac-alloy screw anchors each measuring one-and-a-half inches long. They are designed for masonry or concrete substrates where a reliable mechanical hold is required. The bulk quantity suits contractors and serious DIYers who need consistent supply on larger jobs.

Replaces loose or corroded anchors

When existing fasteners have pulled out, rusted or were undersized for the load, these anchors restore holding power in the same hole diameter. The jump is worth it whenever a project demands a full box of matching anchors rather than handfuls from mixed bins.

Simple hammer-in then screw installation

Drill the correct diameter hole, tap the anchor flush, then drive the screw to expand the zamac body. The most common error is using a hole that is too large, which prevents the anchor from gripping the masonry securely.

Highlights

  • Zamac alloy construction resists corrosion in fireplace heat
  • 100 anchors per pack covers large installation projects
  • 1-1/2 inch length suits standard masonry mounting depths
  • Screw anchor design expands for secure hold in brick or stone
  • New condition ensures full structural integrity out of the box

Specifications

BrandDOTTIE
TypeAnchors

Questions about this item

What diameter drill bit does the WD8 screw anchor need for installation?

The WD8 anchor requires a 1/4 inch drill bit to create the correct pilot hole in concrete or masonry before insertion.

How deep should the hole be drilled for the 1-1/2 inch WD8 anchor?

Drill the hole at least 1-1/2 inches deep to match the anchor length, then clean out dust so the anchor seats fully when tapped in.

When should the Zamac alloy anchors be replaced after installation?

Replace anchors if they show corrosion, looseness, or damage during inspection; Zamac alloy resists rust but degrades over time in damp conditions.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.