L.H. DOTTIE RW54 Conduit Fitting Reducing Washer 1-1/2 in x 1-1/4 Steel PVC

Conduit Reducing Washer 1-1/2 to 1-1/4

This steel and PVC reducing washer adapts a 1-1/2 inch conduit fitting down to a 1-1/4 inch size. It is intended for electricians and maintenance technicians who need to join different conduit diameters in a single run. The mixed-material construction provides mechanical strength while protecting conductors during pulls. Buyers who require a step-up adapter or a non-metallic only coupling will not find that function here.

PVC Temperature and Mechanical Limits

The PVC component limits the fitting to standard conduit operating temperatures and prevents use in high-heat environments where metal-only hardware is specified. Steel threads resist cross-threading but the washer body can deform under excessive torque or impact. The assembly is not rated for liquid-tight service unless the surrounding conduit system provides its own seal. Installers must verify that the ambient conditions stay within the PVC manufacturer's published range.

Hand-Tight Installation With Torque Caution

The washer threads onto the conduit by hand and seats with a strap wrench; no special tools are required beyond those already carried for conduit work. Over-tightening is the most common error and will crack the PVC flange, creating a leak path or code violation. Debris on the threads can also prevent full engagement, so surfaces should be wiped clean before assembly. The part ships individually, so plan quantities for each transition point in the run.