L.H. DOTTIE
L.H. DOTTIE HPTK1 Hydraulic Punch Tool Kit 1/2''-2-1/2'
Punches clean holes in conduit and metal from 1/2 inch to 2-1/2 inches using hydraulic force
- ColorTransparent
- Hydraulic force punches clean holes in thick metal
- Covers conduit sizes from 1/2 inch to 2-1/2 inch
- Complete kit includes all dies and draw studs needed
- Hand-operated hydraulic pump requires no external power source
- Transparent case keeps components organised and visible
Hydraulic Punch Tool Kit 1/2''-2-1/2''
The L.H. DOTTIE HPTK1 is a hydraulic punch tool kit designed for creating clean holes in metal enclosures and panels. It covers a size range from 1/2 inch to 2-1/2 inches using hydraulic force for consistent results. This kit is intended for electricians and maintenance technicians who need reliable conduit entry points.
Suited for trade professionals needing portable
The hydraulic operation reduces operator fatigue compared with manual ratchet punches and works well on mild steel and aluminium enclosures. It is not suited for high-volume production lines that require automated tooling or for punching materials thicker than the manufacturer's rated capacity. Buyers who need a second hydraulic pump or spare punches beyond the supplied range should look elsewhere.
Capacity covers 1/2'' through 2-1/2'' conduit sizes
The included punches and dies handle standard knockout dimensions within this range, providing enough headroom for most residential and light commercial conduit work. The kit runs out when a project demands sizes larger than 2-1/2 inches, non-standard shapes, or materials harder than the rated mild steel limit.
Highlights
- Hydraulic force punches clean holes in thick metal
- Covers conduit sizes from 1/2 inch to 2-1/2 inch
- Complete kit includes all dies and draw studs needed
- Hand-operated hydraulic pump requires no external power source
- Transparent case keeps components organised and visible
Specifications
| Brand | DOTTIE |
|---|---|
| Color | Transparent |
Questions about this item
What size conduit or pipe must I already have to use the 1/2'' to 2-1/2'' punch dies in this kit?
The kit punches holes for conduit trade sizes from 1/2 inch through 2-1/2 inches, so you need the matching conduit or pipe you intend to install.
Can I keep using my existing hand wrenches with the hydraulic pump and dies in this set?
Yes, the hydraulic pump operates by hand pressure and the dies accept standard draw studs, so your current wrenches will still turn the studs.
How do I verify the punch cut a clean, round hole at the correct diameter after setup?
Measure the finished hole with a caliper or tape; it should match the marked conduit size on the die and show no burrs or distortion.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
