L.H. DOTTIE
L.H. DOTTIE HN58 Hex Nut 5/8"-11 Carbon Steel Grade 2 Zinc .535 in Ht
Grade 2 carbon steel hex nut with 5/8"-11 thread and zinc plating for corrosion resistance
- TypeNuts
- Grade 2 carbon steel provides reliable fastening strength
- 5/8"-11 UNC threading fits standard coarse-thread bolts
- Zinc plating resists corrosion in damp environments
- 535 in height allows use in confined spaces
- DOTTIE brand denotes consistent manufacturing quality
Fastener specification
The DOTTIE HN58 is a 5/8"-11 hex nut manufactured from carbon steel to Grade 2 strength. A zinc-plated finish provides corrosion resistance for general-purpose fastening. The nut measures 0.535 in height and uses coarse UNC threading.
Installation fit
The coarse 11 threads per inch suit applications where quick assembly and resistance to cross-threading are preferred. Builders who require fine-thread adjustment or higher-grade tensile strength should select a different fastener. The zinc coating is not intended for prolonged marine or highly acidic exposure.
Critical dimension
The 0.535 in overall height determines whether the nut clears adjacent components and provides sufficient thread engagement. Verify this dimension against the bolt length and joint thickness before ordering.
Highlights
- Grade 2 carbon steel provides reliable fastening strength
- 5/8"-11 UNC threading fits standard coarse-thread bolts
- Zinc plating resists corrosion in damp environments
- 535 in height allows use in confined spaces
- DOTTIE brand denotes consistent manufacturing quality
Specifications
| Brand | DOTTIE |
|---|---|
| Type | Nuts |
Questions about this item
How do I verify the 5/8"-11 hex nut is seated correctly after installation?
The nut should thread fully onto the 5/8"-11 bolt or stud until the bearing face contacts the joint surface with no visible gap; a standard wrench can then apply the required torque for a Grade 2 fastener.
What comes in the package and what must I supply separately?
The box contains the DOTTIE HN58 hex nut only; the matching 5/8"-11 bolt or threaded rod, washers, and any locking device are not included and must be purchased separately.
Which version of the DOTTIE HN58 should I choose for a standard Grade 2 zinc-plated application?
Select the HN58 model with 5/8"-11 threads, carbon steel Grade 2, zinc plating, and 0.535 in height — this is the single specification offered for this part number.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
