L.H. DOTTIE
L.H. DOTTIE 3860 Pull Rope 3/8 Inch x 600 ft 2430 lb Yellow
A 600 ft polypropylene pull rope with 2430 lb breaking strength, resistant to water, oil, gasoline and most chemicals
- High 2430 lb breaking strength handles heavy pulls
- 600 ft continuous length reduces mid-job splices
- Polypropylene build resists rot, water, oil and chemicals
- Lightweight 3/8 in diameter eases handling on long runs
- Safety yellow colour improves visibility in low light
Pull Rope for Electrical Conduit
The L.H. Dottie 3860 pull rope is built for electricians and contractors feeding cable through conduit runs. Its 3/8 inch diameter polypropylene construction resists rot, water, oil, gasoline and most chemicals on the job site. The bright yellow colour improves visibility in dark or crowded trenches. It is supplied new and ready for immediate use.
600 ft Length with 2430 lb Breaking Strength
A single spool delivers 600 ft of continuous rope, reducing the need for joints during long pulls. The 2430 lb tensile rating handles heavy cable bundles and difficult bends without snapping. The 243 lb working load figure indicates the practical limit for sustained tension during installation. Polypropylene stretches under load, so sudden shock loads should be avoided.
Lightweight Polypropylene Construction
The rope weighs less than equivalent nylon or polyester lines, reducing installer fatigue on overhead or vertical pulls. Rot-proof fibres maintain integrity when stored damp or exposed to trench moisture. Chemical resistance protects the rope when pulled through conduit contaminated with cutting oil or fuel residue. No lubricants or pulling aids are included with the spool.
Highlights
- High 2430 lb breaking strength handles heavy pulls
- 600 ft continuous length reduces mid-job splices
- Polypropylene build resists rot, water, oil and chemicals
- Lightweight 3/8 in diameter eases handling on long runs
- Safety yellow colour improves visibility in low light
Specifications
| Brand | L.H. Dottie |
|---|
Questions about this item
Will the 3/8 inch diameter and 600 ft length work with my existing conduit pulls?
The rope measures 3/8 inch outer diameter by 600 ft, so it fits standard conduit sized for that diameter and provides enough length for long runs.
How can I verify the 2430 lb breaking strength is holding up on a job site?
Inspect the yellow polypropylene for cuts, abrasion or chemical damage before each pull; the rot‑proof construction resists water, oil, gasoline and most chemicals, so undamaged rope retains its rated strength.
Does the reel include any pulling accessories or just the 600 ft of yellow polypropylene rope?
The package contains the 3/8 inch x 600 ft pull rope only; pulling eyes, swivels or lubricants must be purchased separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Keson MP301 Measuring Wheel Orange Tubular Steel Frame Metal Spoked Wheel 999Ft
Bazarc Auto Lock Inspection Loop Amber/Blue measurement tool
- Amber/Blue



